rpms/linphone/devel linphone-2.1.1-configure.patch, NONE, 1.1 linphone-2.1.1-oRTP.patch, NONE, 1.1 linphone-2.1.1-mediastreamer.patch, NONE, 1.1
Ralf Corsépius
corsepiu at fedoraproject.org
Fri Mar 13 12:10:57 UTC 2009
- Previous message (by thread): rpms/libv4l/devel .cvsignore, 1.15, 1.16 libv4l.spec, 1.15, 1.16 sources, 1.15, 1.16
- Next message (by thread): rpms/linphone/devel linphone-2.1.0-no_werror.patch, 1.1, NONE linphone-2.1.0-imagedir.patch, 1.1, NONE linphone-2.1.0-ni_maxhost_hack.patch, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: corsepiu
Update of /cvs/pkgs/rpms/linphone/devel
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv4082
Added Files:
linphone-2.1.1-configure.patch linphone-2.1.1-oRTP.patch
linphone-2.1.1-mediastreamer.patch
Log Message:
New.
linphone-2.1.1-configure.patch:
--- NEW FILE linphone-2.1.1-configure.patch ---
diff -Naur linphone-2.1.1.orig/configure.in linphone-2.1.1/configure.in
--- linphone-2.1.1.orig/configure.in 2008-02-13 08:59:44.000000000 +0100
+++ linphone-2.1.1/configure.in 2009-03-13 08:34:53.000000000 +0100
@@ -24,16 +24,14 @@
AC_CONFIG_HEADER(config.h)
AC_SUBST([mkdir_p])
-AC_ISC_POSIX
-AC_PROG_CC
-AC_C_INLINE
AM_PROG_CC_STDC
+AM_PROG_CC_C_O
+AC_C_INLINE
AC_HEADER_STDC
dnl localization tools
-ifdef([IT_PROG_INTLTOOL],[IT_PROG_INTLTOOL],[AC_PROG_INTLTOOL])
+IT_PROG_INTLTOOL
dnl Initialize libtool
AC_PROG_LIBTOOL
-AM_PROG_LIBTOOL
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
dnl Add the languages which your application supports here.
@@ -275,7 +273,6 @@
if test "$GCC$strictness" = "yesyes" ; then
STRICT_OPTIONS="-Wall -Wp,-D_FORTIFY_SOURCE=2"
- STRICT_OPTIONS="$STRICT_OPTIONS -Werror"
CFLAGS="$CFLAGS -fno-strict-aliasing"
fi
@@ -332,7 +329,6 @@
AC_OUTPUT([
Makefile
-m4/Makefile
po/Makefile.in
pixmaps/Makefile
ipkg/Makefile
diff -Naur linphone-2.1.1.orig/m4/Makefile.am linphone-2.1.1/m4/Makefile.am
--- linphone-2.1.1.orig/m4/Makefile.am 2007-01-19 23:24:00.000000000 +0100
+++ linphone-2.1.1/m4/Makefile.am 1970-01-01 01:00:00.000000000 +0100
@@ -1,2 +0,0 @@
-EXTRA_DIST= $(shell cd $(srcdir) && ls *.m4)
-
diff -Naur linphone-2.1.1.orig/m4/Makefile.in linphone-2.1.1/m4/Makefile.in
--- linphone-2.1.1.orig/m4/Makefile.in 2008-02-13 10:16:47.000000000 +0100
+++ linphone-2.1.1/m4/Makefile.in 1970-01-01 01:00:00.000000000 +0100
@@ -1,405 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
- at SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = m4
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/exosip.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/isc-posix.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/ortp.m4 \
- $(top_srcdir)/m4/osip.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-ARMBUILD_FALSE = @ARMBUILD_FALSE@
-ARMBUILD_TRUE = @ARMBUILD_TRUE@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_CONSOLE_FALSE = @BUILD_CONSOLE_FALSE@
-BUILD_CONSOLE_TRUE = @BUILD_CONSOLE_TRUE@
-BUILD_GNOME_APPLET_FALSE = @BUILD_GNOME_APPLET_FALSE@
-BUILD_GNOME_APPLET_TRUE = @BUILD_GNOME_APPLET_TRUE@
-BUILD_GTK_FALSE = @BUILD_GTK_FALSE@
-BUILD_GTK_TRUE = @BUILD_GTK_TRUE@
-BUILD_MEDIA_API_FALSE = @BUILD_MEDIA_API_FALSE@
-BUILD_MEDIA_API_TRUE = @BUILD_MEDIA_API_TRUE@
-BUILD_TRUESPEECH_FALSE = @BUILD_TRUESPEECH_FALSE@
-BUILD_TRUESPEECH_TRUE = @BUILD_TRUESPEECH_TRUE@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLE_MANUAL_FALSE = @ENABLE_MANUAL_FALSE@
-ENABLE_MANUAL_TRUE = @ENABLE_MANUAL_TRUE@
-EXEEXT = @EXEEXT@
-EXOSIP_CFLAGS = @EXOSIP_CFLAGS@
-EXOSIP_LIBS = @EXOSIP_LIBS@
-EXTERNAL_ORTP_FALSE = @EXTERNAL_ORTP_FALSE@
-EXTERNAL_ORTP_TRUE = @EXTERNAL_ORTP_TRUE@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNOME_APPLETS_CFLAGS = @GNOME_APPLETS_CFLAGS@
-GNOME_APPLETS_LIBS = @GNOME_APPLETS_LIBS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
-INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
-INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
-INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@
-INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
-INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
-INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
-INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
-INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@
-INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
-INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
-INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
-INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
-INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
-INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-IPV6_CFLAGS = @IPV6_CFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBGTK_CFLAGS = @LIBGTK_CFLAGS@
-LIBGTK_LIBS = @LIBGTK_LIBS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBLINPHONE_SO_VERSION = @LIBLINPHONE_SO_VERSION@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LINPHONE_CFLAGS = @LINPHONE_CFLAGS@
-LINPHONE_LIBS = @LINPHONE_LIBS@
-LINPHONE_VERSION = @LINPHONE_VERSION@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MS2_VERSION = @MS2_VERSION@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-ORTP_CFLAGS = @ORTP_CFLAGS@
-ORTP_LIBS = @ORTP_LIBS@
-ORTP_VERSION = @ORTP_VERSION@
-OSIP_CFLAGS = @OSIP_CFLAGS@
-OSIP_LIBS = @OSIP_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-READLINE_CFLAGS = @READLINE_CFLAGS@
-READLINE_LIBS = @READLINE_LIBS@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPEEX_CFLAGS = @SPEEX_CFLAGS@
-SPEEX_LIBS = @SPEEX_LIBS@
-STRICT_OPTIONS = @STRICT_OPTIONS@
-STRIP = @STRIP@
-TRUESPEECH_CFLAGS = @TRUESPEECH_CFLAGS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-have_sgmltools = @have_sgmltools@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-subdirs = @subdirs@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-EXTRA_DIST = $(shell cd $(srcdir) && ls *.m4)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu m4/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff -Naur linphone-2.1.1.orig/Makefile.am linphone-2.1.1/Makefile.am
--- linphone-2.1.1.orig/Makefile.am 2007-11-05 14:33:36.000000000 +0100
+++ linphone-2.1.1/Makefile.am 2009-03-13 08:34:53.000000000 +0100
@@ -9,7 +9,7 @@
ORTP_DIR = oRTP
endif
-SUBDIRS = m4 pixmaps po ipkg $(ORTP_DIR) mediastreamer2\
+SUBDIRS = pixmaps po ipkg $(ORTP_DIR) mediastreamer2\
media_api coreapi console gtk share
@@ -20,7 +20,6 @@
README.arm \
autogen.sh \
linphone.spec.in linphone.spec
-ACLOCAL_FLAGS=-I$(top_srcdir)/m4
DISTCLEANFILES= intltool-extract intltool-merge intltool-update po/stamp-it po/.intltool-merge-cache
diff -Naur linphone-2.1.1.orig/po/Makefile.in.in linphone-2.1.1/po/Makefile.in.in
--- linphone-2.1.1.orig/po/Makefile.in.in 2007-01-17 11:15:53.000000000 +0100
+++ linphone-2.1.1/po/Makefile.in.in 2009-03-13 08:34:53.000000000 +0100
@@ -1,402 +1,216 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <drepper at gnu.ai.mit.edu>
+# Makefile for program source directory in GNU NLS utilities package.
+# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper at gnu.ai.mit.edu>
+# Copyright (C) 2004-2008 Rodney Dawes <dobey.pwns at gmail.com>
#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
+# This file may be copied and used freely without restrictions. It may
+# be used in projects which are not available under a GNU Public License,
+# but which still want to provide support for the GNU gettext functionality.
#
-# Origin: gettext-0.16
+# - Modified by Owen Taylor <otaylor at redhat.com> to use GETTEXT_PACKAGE
+# instead of PACKAGE and to look for po2tbl in ./ not in intl/
+#
+# - Modified by jacob berkman <jacob at ximian.com> to install
+# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
+#
+# - Modified by Rodney Dawes <dobey.pwns at gmail.com> for use with intltool
+#
+# We have the following line for use by intltoolize:
+# INTLTOOL_MAKEFILE
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
SHELL = /bin/sh
- at SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
+top_builddir = @top_builddir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
+datarootdir = @datarootdir@
+libdir = @libdir@
+DATADIRNAME = @DATADIRNAME@
+itlocaledir = $(prefix)/$(DATADIRNAME)/locale
+subdir = po
+install_sh = @install_sh@
+# Automake >= 1.8 provides @mkdir_p at .
+# Until it can be supposed, use the safe fallback:
+mkdir_p = $(install_sh) -d
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-MSGFMT_ = @MSGFMT@
-MSGFMT_no = @MSGFMT@
-MSGFMT_yes = @MSGFMT_015@
-MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist
+GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot
-POTFILES = \
+ALL_LINGUAS = @ALL_LINGUAS@
+
+PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi)
-CATALOGS = @CATALOGS@
+USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep ^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep ^$$lang$$`"; then printf "$$lang "; fi; done; fi)
-# Makevars gets inserted here. (Don't remove this line!)
+USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done)
+
+POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done)
+
+DISTFILES = Makefile.in.in POTFILES.in $(POFILES)
+EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS
+
+POTFILES = \
+# This comment gets stripped out
+
+CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done)
.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+.SUFFIXES: .po .pox .gmo .mo .msg .cat
+
+.po.pox:
+ $(MAKE) $(GETTEXT_PACKAGE).pot
+ $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox
.po.mo:
- @echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+ $(MSGFMT) -o $@ $<
.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
+ file=`echo $* | sed 's,.*/,,'`.gmo \
+ && rm -f $$file && $(GMSGFMT) -o $$file $<
+
+.po.cat:
+ sed -f ../intl/po2msg.sed < $< > $*.msg \
+ && rm -f $@ && gencat $@ $*.msg
all: all- at USE_NLS@
-all-yes: stamp-po
+all-yes: $(CATALOGS)
all-no:
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, stamp-po is a nop (i.e. a phony target).
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
- test ! -f $(srcdir)/$(DOMAIN).pot || \
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @test ! -f $(srcdir)/$(DOMAIN).pot || { \
- echo "touch stamp-po" && \
- echo timestamp > stamp-poT && \
- mv stamp-poT stamp-po; \
- }
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
- msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
- else \
- msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
- fi; \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address"
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- if test -f "$(srcdir)/$${lang}.po"; then \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
- else \
- $(MAKE) $${lang}.po-create; \
- fi
-
+$(GETTEXT_PACKAGE).pot: $(POTFILES)
+ $(GENPOT)
-install: install-exec install-data
-install-exec:
+install: install-data
install-data: install-data- at USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
install-data-no: all
install-data-yes: all
- $(mkdir_p) $(DESTDIR)$(datadir)
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ linguas="$(USE_LINGUAS)"; \
+ for lang in $$linguas; do \
+ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $$dir; \
+ if test -r $$lang.gmo; then \
+ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
+ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \
+ else \
+ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
+ echo "installing $(srcdir)/$$lang.gmo as" \
+ "$$dir/$(GETTEXT_PACKAGE).mo"; \
+ fi; \
+ if test -r $$lang.gmo.m; then \
+ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \
+ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \
+ else \
+ if test -r $(srcdir)/$$lang.gmo.m ; then \
+ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \
+ $$dir/$(GETTEXT_PACKAGE).mo.m; \
+ echo "installing $(srcdir)/$$lang.gmo.m as" \
+ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \
+ else \
+ true; \
fi; \
- done; \
+ fi; \
done
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data- at USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- $(mkdir_p) $(DESTDIR)$(datadir)
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
+# Empty stubs to satisfy archaic automake needs
+dvi info tags TAGS ID:
# Define this as empty until I found a useful application.
-installcheck:
+install-exec installcheck:
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data- at USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
+uninstall:
+ linguas="$(USE_LINGUAS)"; \
+ for lang in $$linguas; do \
+ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
+ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
done
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
+check: all $(GETTEXT_PACKAGE).pot
+ rm -f missing notexist
+ srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m
+ if [ -r missing -o -r notexist ]; then \
+ exit 1; \
+ fi
mostlyclean:
- rm -f remove-potcdate.sed
- rm -f stamp-poT
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
+ rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp
+ rm -f .intltool-merge-cache
clean: mostlyclean
distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo
+ rm -f Makefile Makefile.in POTFILES stamp-it
+ rm -f *.mo *.msg *.cat *.cat.m *.gmo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- rm -f stamp-po $(GMOFILES)
+ rm -f Makefile.in.in
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- $(MAKE) update-po
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: stamp-po $(DISTFILES)
+distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir: $(DISTFILES)
dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- dists="$$dists $(DOMAIN).pot stamp-po"; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
+ extra_dists="$(EXTRA_DISTFILES)"; \
+ for file in $$extra_dists; do \
+ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \
done; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir) || exit 1; \
- else \
- cp -p $(srcdir)/$$file $(distdir) || exit 1; \
- fi; \
+ test -f $$file || file="$(srcdir)/$$file"; \
+ ln $$file $(distdir) 2> /dev/null \
+ || cp -p $$file $(distdir); \
done
update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
- @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
- echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
- exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ $(MAKE) $(GETTEXT_PACKAGE).pot
tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
+ linguas="$(USE_LINGUAS)"; \
+ for lang in $$linguas; do \
+ echo "$$lang:"; \
+ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \
+ if $$result; then \
+ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ exit 1; \
+ fi; \
fi; \
+ else \
+ echo "msgmerge for $$lang.gmo failed!"; \
+ rm -f $$tmpdir/$$lang.new.po; \
fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
+ done
-update-gmo: Makefile $(GMOFILES)
- @:
+Makefile POTFILES: stamp-it
+ @if test ! -f $@; then \
+ rm -f stamp-it; \
+ $(MAKE) stamp-it; \
+ fi
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in
cd $(top_builddir) \
- && $(SHELL) ./config.status $(subdir)/$@.in po-directories
-
-force:
+ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \
+ $(SHELL) ./config.status
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
linphone-2.1.1-oRTP.patch:
--- NEW FILE linphone-2.1.1-oRTP.patch ---
diff -Naur linphone-2.1.1.orig/oRTP/Makefile.am linphone-2.1.1/oRTP/Makefile.am
--- linphone-2.1.1.orig/oRTP/Makefile.am 2007-10-18 22:05:10.000000000 +0200
+++ linphone-2.1.1/oRTP/Makefile.am 2009-03-13 08:38:34.000000000 +0100
@@ -12,14 +12,13 @@
if HAVE_DOXYGEN
# doxdir & pkgdocdir are not always defined by automake
-docdir=$(datadir)/doc
pkgdocdir=$(docdir)/$(PACKAGE)-$(VERSION)
doc_htmldir=$(pkgdocdir)/html
doc_html_DATA = $(top_builddir)/doc/html/html.tar
$(doc_html_DATA): $(top_builddir)/doc/html/index.html
- cd $(<D) && tar cf html.tar *
+ cd $(top_builddir)/doc/html && tar cf html.tar *
$(top_builddir)/doc/html/index.html: $(SOURCES) ortp.doxygen Makefile.am
rm -rf doc
@@ -51,7 +50,7 @@
.PHONY: package
PKG_NAME = $(PACKAGE)-$(VERSION)-$(RELEASE)
-BUILDROOT = $(shell pwd)/epm-install
+BUILDROOT = `pwd`/epm-install
package: $(srcdir)/pkg.list $(srcdir)/configure
-rm -rf pkg $(BUILDROOT) $(PKG_NAME).*
linphone-2.1.1-mediastreamer.patch:
--- NEW FILE linphone-2.1.1-mediastreamer.patch ---
diff -Naur linphone-2.1.1.orig/mediastreamer2/acinclude.m4 linphone-2.1.1/mediastreamer2/acinclude.m4
--- linphone-2.1.1.orig/mediastreamer2/acinclude.m4 2007-12-14 12:17:57.000000000 +0100
+++ linphone-2.1.1/mediastreamer2/acinclude.m4 2009-03-13 08:37:11.000000000 +0100
@@ -1,3 +1,4 @@
+dnl -*- autoconf -*-
AC_DEFUN([MS_CHECK_DEP],[
dnl $1=dependency description
dnl $2=dependency short name, will be suffixed with _CFLAGS and _LIBS
@@ -7,7 +8,7 @@
dnl $6=lib to check
dnl $7=function to check in library
- NAME=$2
+ dep_name=$2
dep_headersdir=$3
dep_libsdir=$4
dep_header=$5
@@ -15,31 +16,31 @@
dep_funclib=$7
other_libs=$8
- if test "$dep_headersdir" != "/usr/include" ; then
- eval ${NAME}_CFLAGS=\"-I$dep_headersdir \"
- fi
- eval ${NAME}_LIBS=\"-L$dep_libsdir -l$dep_lib\"
-
CPPFLAGS_save=$CPPFLAGS
LDFLAGS_save=$LDFLAGS
- CPPFLAGS="-I$dep_headersdir "
- LDFLAGS="-L$dep_libsdir "
+ LIBS_save=$LIBS
+ CPPFLAGS=`echo "-I$dep_headersdir"|sed -e "s:-I/usr/include[\ ]*$::"`
+ LIBS="-l$dep_lib"
+ LDFLAGS=`echo "-L$dep_libsdir"|sed -e "s:-L/usr/lib\(64\)*[\ ]*::"`
+ $2_CFLAGS="$CPPFLAGS"
+ $2_LIBS="$LDFLAGS $LIBS"
+
AC_CHECK_HEADERS([$dep_header],[AC_CHECK_LIB([$dep_lib],[$dep_funclib],found=yes,found=no, [$other_libs])
],found=no)
if test "$found" = "yes" ; then
- eval ${NAME}_found=yes
- AC_SUBST($2_CFLAGS)
- AC_SUBST($2_LIBS)
+ eval $2_found=yes
else
- eval ${NAME}_found=no
- eval ${NAME}_CFLAGS=
- eval ${NAME}_LIBS=
+ eval $2_found=no
+ eval $2_CFLAGS=
+ eval $2_LIBS=
fi
+ AC_SUBST($2_CFLAGS)
+ AC_SUBST($2_LIBS)
CPPFLAGS=$CPPFLAGS_save
LDFLAGS=$LDFLAGS_save
-
+ LIBS=$LIBS_save
])
@@ -72,28 +73,56 @@
AC_MSG_ERROR([Could not find ffmpeg headers and library. This is mandatory for video support])
fi
+ dnl check for new/old ffmpeg header file layout
+ CPPFLAGS_save=$CPPFLAGS
+ CPPFLAGS="$FFMPEG_CFLAGS $CPPFLAGS"
+ AC_CHECK_HEADERS(libavcodec/avcodec.h)
+ CPPFLAGS=$CPPFLAGS_save
+
dnl to workaround a bug on debian and ubuntu, check if libavcodec needs -lvorbisenc to compile
AC_CHECK_LIB(avcodec,avcodec_register_all, novorbis=yes , [
LIBS="$LIBS -lvorbisenc"
], $FFMPEG_LIBS )
- dnl check if sws_scale is available
- AC_CHECK_LIB(avcodec,sws_scale, have_sws_scale=yes , have_sws_scale=no,
- $FFMPEG_LIBS )
- if test x$have_sws_scale = xno ; then
- PKG_CHECK_MODULES(SWSCALE, [libswscale >= 0.5.0 ], need_swscale=yes, need_swscale=no)
- fi
-
- MS_CHECK_DEP([SDL],[SDL],[${libsdldir}/include],[${libsdldir}/lib],[SDL/SDL.h],[SDL],[SDL_Init])
- if test "$SDL_found" = "no" ; then
- AC_MSG_ERROR([Could not find libsdl headers and library. This is mandatory for video support])
+ dnl when swscale feature is not provided by
+ dnl libswscale, its features are swallowed by
+ dnl libavcodec, but without swscale.h and without any
+ dnl declaration into avcodec.h (this is to be
+ dnl considered as an ffmpeg bug).
+ dnl
+ dnl #if defined(HAVE_LIBAVCODEC_AVCODEC_H) && !defined(HAVE_LIBSWSCALE_SWSCALE_H)
+ dnl # include "swscale.h" // private linhone swscale.h
+ dnl #endif
+ CPPFLAGS_save=$CPPFLAGS
+ CPPFLAGS="$FFMPEG_CFLAGS $CPPFLAGS"
+ AC_CHECK_HEADERS(libswscale/swscale.h)
+ CPPFLAGS=$CPPFLAGS_save
+
+ PKG_CHECK_MODULES(SWSCALE, [libswscale >= 0.5.0 ], [echo "We have libswscale"],
+ [echo "We don't have libswscale, let's hope its symbols are in libavcodec"] )
+
+ if test "$libsdldir" != "none" ; then
+ MS_CHECK_DEP([SDL],[SDL],[${libsdldir}/include],[${libsdldir}/lib],[SDL/SDL.h],[SDL],[SDL_Init])
+ if test "$SDL_found" = "no" ; then
+ AC_MSG_ERROR([Could not find libsdl headers and library. This is mandatory for video support])
+ fi
fi
PKG_CHECK_MODULES(THEORA, [theora >= 1.0alpha7 ], [have_theora=yes],
[have_theora=no])
-
- VIDEO_CFLAGS=" $FFMPEG_CFLAGS $SDL_CFLAGS -DVIDEO_ENABLED "
- VIDEO_LIBS=" $FFMPEG_LIBS $SWSCALE_LIBS $SDL_LIBS"
+ AC_CHECK_HEADERS(X11/Xlib.h)
+
+ VIDEO_CFLAGS=" $FFMPEG_CFLAGS -DVIDEO_ENABLED"
+ VIDEO_LIBS=" $FFMPEG_LIBS $SWSCALE_LIBS"
+
+ if test "$SDL_found" = "yes" ; then
+ VIDEO_CFLAGS="$VIDEO_CFLAGS $SDL_CFLAGS -DHAVE_SDL"
+ VIDEO_LIBS="$VIDEO_LIBS $SDL_LIBS"
+ fi
+
+ if test "${ac_cv_header_X11_Xlib_h}" = "yes" ; then
+ VIDEO_LIBS="$VIDEO_LIBS -lX11"
+ fi
fi
AC_SUBST(VIDEO_CFLAGS)
diff -Naur linphone-2.1.1.orig/mediastreamer2/configure.ac linphone-2.1.1/mediastreamer2/configure.ac
--- linphone-2.1.1.orig/mediastreamer2/configure.ac 2008-01-18 23:12:55.000000000 +0100
+++ linphone-2.1.1/mediastreamer2/configure.ac 2009-03-13 08:37:11.000000000 +0100
@@ -109,10 +109,6 @@
CFLAGS="$CFLAGS -D_BIGENDIAN "
fi
-if test $GCC = yes && test $wall_werror = yes; then
- CFLAGS="$CFLAGS -Werror "
-fi
-
macosx_found=no
dnl add thread flags
diff -Naur linphone-2.1.1.orig/mediastreamer2/src/ice.c linphone-2.1.1/mediastreamer2/src/ice.c
--- linphone-2.1.1.orig/mediastreamer2/src/ice.c 2007-10-18 22:05:10.000000000 +0200
+++ linphone-2.1.1/mediastreamer2/src/ice.c 2009-03-13 08:37:11.000000000 +0100
@@ -25,6 +25,10 @@
#include <netdb.h>
#endif
+#ifndef NI_MAXHOST
+#define NI_MAXHOST 1025
+#endif
+
#include "mediastreamer2/ice.h"
#include "mediastreamer2/mscommon.h"
diff -Naur linphone-2.1.1.orig/mediastreamer2/src/Makefile.am linphone-2.1.1/mediastreamer2/src/Makefile.am
--- linphone-2.1.1.orig/mediastreamer2/src/Makefile.am 2008-01-01 01:05:54.000000000 +0100
+++ linphone-2.1.1/mediastreamer2/src/Makefile.am 2009-03-13 08:37:11.000000000 +0100
@@ -121,7 +121,7 @@
AM_CFLAGS+=$(VIDEO_CFLAGS)
endif
-imgdir=$(datadir)/images/
+imgdir=$(datadir)/images/linphone/
img_DATA=nowebcamCIF.jpg
diff -Naur linphone-2.1.1.orig/mediastreamer2/src/nowebcam.c linphone-2.1.1/mediastreamer2/src/nowebcam.c
--- linphone-2.1.1.orig/mediastreamer2/src/nowebcam.c 2007-12-14 14:37:56.000000000 +0100
+++ linphone-2.1.1/mediastreamer2/src/nowebcam.c 2009-03-13 08:37:11.000000000 +0100
@@ -83,8 +83,8 @@
mblk_t *ms_load_nowebcam(MSVideoSize *reqsize, int idx){
char tmp[256];
if (idx<0)
- snprintf(tmp, sizeof(tmp), "%s/images/%s.jpg", PACKAGE_DATA_DIR, NOWEBCAM_JPG);
+ snprintf(tmp, sizeof(tmp), "%s/images/linphone/%s.jpg", PACKAGE_DATA_DIR, NOWEBCAM_JPG);
else
- snprintf(tmp, sizeof(tmp), "%s/images/%s%i.jpg", PACKAGE_DATA_DIR, NOWEBCAM_JPG, idx);
+ snprintf(tmp, sizeof(tmp), "%s/images/linphone/%s%i.jpg", PACKAGE_DATA_DIR, NOWEBCAM_JPG, idx);
return ms_load_jpeg_as_yuv(tmp,reqsize);
}
- Previous message (by thread): rpms/libv4l/devel .cvsignore, 1.15, 1.16 libv4l.spec, 1.15, 1.16 sources, 1.15, 1.16
- Next message (by thread): rpms/linphone/devel linphone-2.1.0-no_werror.patch, 1.1, NONE linphone-2.1.0-imagedir.patch, 1.1, NONE linphone-2.1.0-ni_maxhost_hack.patch, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the fedora-extras-commits
mailing list