[Fedora-ia64-list] Fedora ia64 Buglist 2006-10-16
Akio Takebe
takebe_akio at jp.fujitsu.com
Tue Oct 17 04:14:27 UTC 2006
Hi, YongKang
I can boot domU with 2.6.18-1.2784.fc6xen.
I used the following config of domU.
===================================================================
kernel = "/boot/efi/efi/redhat/vmlinuz-2.6.18-1.2784.fc6xen"
ramdisk = "/boot/efi/efi/redhat/initrd-2.6.18-1.2784.fc6xenU.img"
memory = 1024
name = "fc6.DomU"
vif = [ '' ]
disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ]
root = "/dev/sda1 ro"
extra = "4 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe selinux=0
rhgb"
===================================================================
I make initrd by the following command.
# mkinitrd -v -f /boot/efi/efi/redhat/initrd-2.6.18-1.2784.fc6xenU.img 2.
6.18-1.2784.fc6xen --preload xenblk
The boot log is the below.
# xm create fc6.para.conf
Using config file "fc6.para.conf".
Started domain fc6.DomU
[root at tiger111 xen]# xm console fc6.DomU
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Software IO TLB disabled
Memory: 824656k/983024k available (5972k code, 157728k reserved, 4095k
data, 288k init)
McKinley Errata 9 workaround not needed; disabling it
Percpu irq 31 is unsupported by xen!
Percpu irq 29 is unsupported by xen!
Percpu irq 232 is unsupported by xen!
Percpu irq 240 is unsupported by xen!
Percpu irq 28 is unsupported by xen!
register RESCHEDULE_VECTOR (RESCHED0) to xen irq (256)
register IPI_VECTOR (IPI0) to xen irq (257)
Percpu irq 238 is unsupported by xen!
register VIRQ_ITC (timer0) to xen irq (258)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 1024
ACPI: Core revision 20060707
Boot processor id 0x0/0x0
Brought up 1 CPUs
Total of 1 processors activated (2236.41 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 8784kB freed
DMI not present or invalid.
grant table at e000010000000000
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
Brought up 1 CPUs
ACPI: SCI (ACPI GSI 0) not registered
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 0 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 2, 65536 bytes)
TCP established hash table entries: 32768 (order: 6, 1048576 bytes)
TCP bind hash table entries: 16384 (order: 5, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 16384)
TCP reno registered
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
Unsupported IPI type 0x1c
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1161058138.176:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F58FD45491CCB5CE
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus
=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EFI Variables Facility v0.08 2004-May-17
efivars: get_next_variable: status=8000000000000003
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
xen privcmd uses pseudo physical addr range [0x40000000, 0x3fffc000000]
(4193216MB)
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 288kB freed
Red Hat nash version 5.1.19 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Registering block device major 8
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
register_blkdev: cannot get major 8 for sd
Loading scsi_transport_spi.ko module
Loading mptbase.ko module
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Loading mptscsih.ko module
Loading mptspi.ko module
Fusion MPT SPI Host driver 3.04.01
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (utc): Tue Oct 17 13:09:05 JST 2006 [ OK ]
Starting udev: [ OK ]
Setting hostname fc6DomU: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 108772/1310720 files, 917853/2621440 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 4
Entering non-interactive startup
Starting readahead_early: Starting background readahead: [ OK ]
[ OK ]
Checking for hardware changes [ OK ]
Applying ip6tables firewall rules: modprobe: FATAL: Could not load /lib/
modules/2.6.18-1.2784.fc6xen/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.18-1.2784.fc6xen/
modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.18-1.2784.fc6xen/
modules.dep: No such file or directory
ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable
'filter'
Error occurred at line: 3
Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more
information.
[FAILED]
Applying iptables firewall rules: modprobe: FATAL: Could not load /lib/
modules/2.6.18-1.2784.fc6xen/modules.dep: No such file or directory
iptables-restore v1.3.5: iptables-restore: unable to initializetable
'filter'
Error occurred at line: 3
Try `iptables-restore -h' or 'iptables-restore --help' for more
information.
[FAILED]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: xennet device eth0 does not seem to be
present, delaying initialization.
[FAILED]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: FATAL: Could not load /lib/modules/2.6.18-1.2784.
fc6xen/modules.dep: No such file or directory
Starting system message bus: Unknown username "named" in message bus
configuration file
[ OK ]
Can't open RFCOMM control socket: Address family not supported by
protocol
Mounting other filesystems: [ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
Starting hidd: Can't open HIDP control socket: Address family not
supported by protocol
[FAILED]
Loading autofs4: [FAILED]
Starting acpi daemon: [ OK ]
Starting cups: [ OK ]
Starting sshd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting VNC server: no displays configured [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting yum-updatesd: [ OK ]
Starting Avahi daemon: [ OK ]
Starting HAL daemon: hald(1155): unaligned access to 0x60000ffffef7f61c,
ip=0x200000000050a8d0
hald(1155): unaligned access to 0x60000ffffef7f61c, ip=
0x200000000050a7c1
[ OK ]
Starting xend: [ OK ]
Starting smartd: [ OK ]
Fedora Core release 5.92 (FC6 Test3)
Kernel 2.6.18-1.2784.fc6xen on an ia64
fc6DomU login:
Best Regards,
Akio Takebe
More information about the Fedora-ia64-list
mailing list