R: [Fedora-ia64-list] mount: could not find filesystem '/dev/root'
Bettoni Fabio
fabio.bettoni at telecomitalia.it
Tue Feb 26 16:23:13 UTC 2008
Hi Doug,
I've just booted your kernel-2.6.24-2.fc9.ia64.rpm and I have again "mount: could not find filesystem '/dev/root'".
Fabio
-----Messaggio originale-----
Da: fedora-ia64-list-bounces at redhat.com [mailto:fedora-ia64-list-bounces at redhat.com] Per conto di Doug Chapman
Inviato: martedì 26 febbraio 2008 16.40
A: ia64 Fedora Core Development
Oggetto: Re: [Fedora-ia64-list] mount: could not find filesystem '/dev/root'
Fabio,
This slightly older F9 rawhide kernel boots on my system. You should be able to use this kernel along with the rest of the latest repo for a usable system until a fixed kernel is available:
http://ia64.koji.fedoraproject.org/fedora-ia64/rawhide-20080212/development/ia64/os/Packages/kernel-2.6.24-2.fc9.ia64.rpm
I will send out mail to the list when the kernel is stable again. In the meantime when you do updates do:
yum update --exclude kernel
- Doug
On Tue, 2008-02-26 at 08:55 -0500, Doug Chapman wrote:
> Fabio,
>
> I have seen the same thing on my systems. It has been fixed in the
> upstream kernel so it should be fixed the next time Fedora pulls in
> the latest kernel.
>
> I will check to see if they plan on doing that soon, if not I will
> build a patched kernel for ia64.
>
> - Doug
>
>
> On Tue, 2008-02-26 at 10:16 +0100, Bettoni Fabio wrote:
> > Hi to all,
> > I don't know if it is a configuration problem or bug, so I ask to
> > you before filling a bugzilla.
> > I'm updating a system since a long time, so last running kernel is
> > 2.6.21-1.3194.fc7
> > If I boot new kernel I get the following.
> >
> > thank you
> > Fabio
> >
> > ---------
> > ELILO boot:
> > Uncompressing Linux... done
> > Loading file initrd-2.6.25-0.55.rc2.git2.fc9.img...done
> > ...
> > Loading ext3 module
> > SCSI subsystem initialized
> > Loading scsi_mod module
> > Driver 'sd' needs updating - please use bus_type methods Loading
> > sd_mod module Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007
> > LSI Corporation Loading scsi_wait_scan module Loading
> > scsi_transport_spi module Loading mptbase module Fusion MPT SPI Host
> > driver 3.04.06 Loading mptscsih module Loading mptspi module GSI 27
> > (level, low) -> CPU 1 (0x0100) vector 53
> > ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 53
> > mptbase: ioc0: Initiating bringup
> > ioc0: LSI53C1030 C0: Capabilities={Initiator,Target} usb 3-1: new
> > low speed USB device using ohci_hcd and address 2 scsi0 : ioc0:
> > LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=53 usb 3-1:
> > configuration #1 chosen from 1 choice
> > input: P.I. Engineering PC Keyboard/Mouse to USB Adapter as
> > /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input0
> > input,hidraw0: USB HID v1.00 Keyboard [P.I. Engineering PC
> > Keyboard/Mouse to USB Adapter] on usb-0000:00:02.1-1
> > input: P.I. Engineering PC Keyboard/Mouse to USB Adapter as
> > /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.1/input/input1
> > input,hidraw1: USB HID v1.00 Mouse [P.I. Engineering PC
> > Keyboard/Mouse to USB Adapter] on usb-0000:00:02.1-1 usb 3-1: New
> > USB device found, idVendor=05f3, idProduct=0203 usb 3-1: New USB
> > device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product:
> > PC Keyboard/Mouse to USB Adapter usb 3-1: Manufacturer: P.I.
> > Engineering GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
> > ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 54
> > mptbase: ioc1: Initiating bringup
> > ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
> > scsi1 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=54
> > scsi 0:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC3 PQ: 0
> > ANSI: 3
> > target0:0:1: Beginning Domain Validation
> > target0:0:1: Ending Domain Validation
> > target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP
> > (6.25 ns, offset 127)
> > scsi 1:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC3 PQ: 0
> > ANSI: 3
> > Loading sym53c8xx module
> > target1:0:0: Beginning Domain Validation GSI 71 (level, low) -> CPU
> > 1 (0x0100) vector 55
> > ACPI: PCI Interrupt 0000:c0:01.0[A] -> GSI 71 (level, low) -> IRQ 55
> > target1:0:0: Ending Domain Validation
> > target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP
> > (6.25 ns, offset 127)
> > sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 55
> > sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
> > sym0: open drain IRQ line driver, using on-chip SRAM
> > sym0: using LOAD/STORE-based firmware.
> > sym0: handling phase mismatch from SCRIPTS.
> > sym0: SCSI BUS has been reset.
> > scsi2 : sym-2.2.3
> > Loading sd_mod module
> > Creating root device.
> > Mounting root filesystem.
> > mount: could not find filesystem '/dev/root'
> > Setting up other filesystems.
> > Setting up new root fs
> > setuproot: moving /dev failed: No such file or directory no
> > fstab.sys, mounting internal defaults
> > setuproot: error mounting /proc: No such file or directory
> > setuproot: error mounting /sys: No such file or directory Mount
> > failed for selinuxfs on /selinux: No such file or directory
> > Switching to new root and running init.
> > unmounting old /dev
> > unmounting old /proc
> > unmounting old /sys
> > switchroot: mount failed: No such file or directory Booting has
> > failed.
> > sd 0:0:1:0: [sda] 143374738 512-byte hardware sectors (73408 MB) sd
> > 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Write cache:
> > disabled, read cache: enabled, supports DPO and FUA sd 0:0:1:0:
> > [sda] 143374738 512-byte hardware sectors (73408 MB) sd 0:0:1:0:
> > [sda] Write Protect is off sd 0:0:1:0: [sda] Write cache: disabled,
> > read cache: enabled, supports DPO and FUA
> > sda: sda1 sda2 sda3 sda4 sda5
> > sd 0:0:1:0: [sda] Attached SCSI disk
> > target2:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
> > scsi 2:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0
> > ANSI: 3
> > target2:0:0: tagged command queuing enabled, command queue depth 16.
> > target2:0:0: Beginning Domain Validation
> > target2:0:0: asynchronous
> > target2:0:0: wide asynchronous
> > target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
> > target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
> > target2:0:0: Ending Domain Validation
> > scsi 2:0:1:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0
> > ANSI: 3
> > target2:0:1: tagged command queuing enabled, command queue depth 16.
> > target2:0:1: Beginning Domain Validation
> > target2:0:1: asynchronous
> > target2:0:1: wide asynchronous
> >
> > all six disks are shown in the log and after system hangs.
> > ---------
> > modprobe.conf
> > alias eth1 e1000
> > alias eth0 e1000
> > alias scsi_hostadapter mptbase
> > alias scsi_hostadapter1 sym53c8xx
> > alias scsi_hostadapter2 scsi_wait_scan alias usb-controller ohci-hcd
> > alias usb-controller1 ehci-hcd alias bond0 bonding options bonding
> > mode=1 miimon=100
> > --------------------------------------------------------------------
> >
> > CONFIDENTIALITY NOTICE
> >
> > This message and its attachments are addressed solely to the persons above and may contain confidential information. If you have received the message in error, be informed that any use of the content hereof is prohibited. Please return it immediately to the sender and delete the message. Should you have any questions, please contact us by replying to webmaster at telecomitalia.it.
> >
> > Thank you
> >
> > www.telecomitalia.it
> >
> > --------------------------------------------------------------------
> >
> >
> > --
> > Fedora-ia64-list mailing list
> > Fedora-ia64-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-ia64-list
>
> --
> Fedora-ia64-list mailing list
> Fedora-ia64-list at redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-ia64-list
--
Fedora-ia64-list mailing list
Fedora-ia64-list at redhat.com
https://www.redhat.com/mailman/listinfo/fedora-ia64-list
--------------------------------------------------------------------
CONFIDENTIALITY NOTICE
This message and its attachments are addressed solely to the persons above and may contain confidential information. If you have received the message in error, be informed that any use of the content hereof is prohibited. Please return it immediately to the sender and delete the message. Should you have any questions, please contact us by replying to webmaster at telecomitalia.it.
Thank you
www.telecomitalia.it
--------------------------------------------------------------------
More information about the Fedora-ia64-list
mailing list