using cdrecord: Supported Modes: blank!

Richard Tricoche Richard.Tricoche at rpawireless.com
Thu Oct 9 20:21:30 UTC 2003


Note the "Supported modes:"  section is blank.  I've tried burning in TAO,
SAO and RAW with no luck.

Any ideas how I can better detect the supported modes?


--------------------------------------------
sudo  /usr/bin/cdrecord -dummy -v -raw driveropts=burnfree dev=1,4,0
/usr/local/rpa/logarchive/temp.iso 2>&1
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,4,0'
scsibus: 1 target: 4 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC LINKED 
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W1210S'
Revision       : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: 
Drive buf size : 2394336 = 2338 KB
FIFO size      : 4194304 = 4096 KB
Encoding speed : 247x (18493 sectors/s) for libedc from Heiko Eißfeldt
/usr/bin/cdrecord: Drive does not support RAW recording.
/usr/bin/cdrecord: Illegal write mode for this drive.
--------------------------------------------


--rich

PGP FingerPrint: BA3A 4D29 F3CF 172A D90B  05AA 6C1E 65BC C19F F6F1
-----------------------------------------------------------------------




-----Original Message-----
From: Richard Tricoche 
Sent: Thursday, October 09, 2003 3:50 PM
To: 'fedora-list at redhat.com'
Subject: using cdrecord as non-root - no luck! :(


Hi.

I am growing a beard trying to figure out why I cannot burn CDs from a
non-root user.

I've tried changing permissions on /dev/sg0 and /dev/sg1.  I've setuid and
guid on /usr/bin/cdrecord.  I've used 'sudo'.

And still... I get the following error messages!

Yet, I can burn as root on the cmdline.  Can anyone PLEASE help me with
this.  :(

--------------------------------------------
CDRECORD execution error...
scsidev: '1,4,0'
scsibus: 1 target: 4 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC
Type: 1 = CD-ROM Using libscg version 'schily-0.7'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1210S'
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2394336 = 2338 KB FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Drive needs to reload the media to return to proper
status. Track 01: data 269 MB Total size: 309 MB (30:37.46) = 137810 sectors
Lout start: 309 MB (30:39/35) = 137810 sectors Current Secsize: 2048 ATIP
info from disk: Indicated writing power: 6 Is not unrestricted Is not
erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start
of lead in: -11231 (97:32/19) ATIP start of lead out: 359847 (79:59/72) Disk
type: Short strategy type (Phthalocyanine or similar) Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Trying to clear drive status.
Starting to write CD/DVD at speed 12 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds.  8 seconds.  7
seconds.  6 seconds.  5 seconds.  4 seconds.  3 seconds.  2 seconds.  1
seconds.  0 seconds. Operation starts. Waiting for reader process to fill
input buffer ... /usr/bin/cdrecord: Input/output error. read track info:
scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5
Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb)
Fru 0x0 Sense flags: Blk 0 (not valid)
resid: 28
cmd finished after 0.001s timeout 240s
input buffer ready.
BURN-Free is OFF.
Writing time: 0.016s
Average write speed 999.0x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode. Fixating time:
0.003s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
Cmd: sudo /usr/bin/cdrecord -dummy -v dev=1,4,0
/usr/local/rpa/logarchive/temp.iso 2>&1
--------------------------------------------


Sincerely,
Long beard

PGP FingerPrint: BA3A 4D29 F3CF 172A D90B  05AA 6C1E 65BC C19F F6F1
-----------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20031009/0268019b/attachment-0001.htm>


More information about the fedora-list mailing list