Ethernet

[bulent]

Eric Diamond wrote:

>Monday, April 12, 2004 1:58 AM Bülent Açy'kgöz replied:
>
>  
>
>>[root at sbe-60 root]# ifconfig -a
>>eth0      Link encap:Ethernet  HWaddr
>>    
>>
>00:02:44:66:D3:32
>  
>
>>          inet addr:144.122.85.60
>>    
>>
>Bcast:144.122.85.255  Mask:255.255.255.0
>  
>
>>          UP BROADCAST RUNNING MULTICAST  MTU:1500
>>    
>>
>Metric:1
>  
>
>>          RX packets:301403 errors:0 dropped:0
>>    
>>
>overruns:0 frame:0
>  
>
>>          TX packets:115798 errors:14 dropped:0
>>    
>>
>overruns:0 carrier:0
>  
>
>>          collisions:0 txqueuelen:1000
>>          RX bytes:51269291 (48.8 Mb)  TX
>>    
>>
>bytes:119416712 (113.8 Mb)
>  
>
>>          Interrupt:11 Base address:0xec00
>>    
>>
>
>OK. Well, eth0 is up....
>
>  
>
>>[root at sbe-60 root]# ping 144.122.199.20
>>PING 144.122.199.20 (144.122.199.20) 56(84) bytes of
>>    
>>
>data.
>  
>
>>64 bytes from 144.122.199.20: icmp_seq=0 ttl=63
>>    
>>
>time=1.69 ms
>
>And passing traffic....
>
>  
>
>>root at sbe-60 root]# mii-tool eth0
>>eth0: 10 Mbit, half duplex, no link
>>    
>>
>
>But mii-tool sees no link....
>
>>From earlier posts it was clear that ethtool also sees
>no link.
>
>Quite strange indeed.
>
>Could I ask what ethernet hardware you're using? 
>
>Also, a couple of other threads on ethernet problems had
>recommendations to change the functions that report the
>link status. Have you done any of that to your
>networking scripts?
>
>Eric Diamond
>eDiamond Networking & Security
>303-246-9555
>eric at ediamond.net
>
>
>  
>
I use SURECOM EP-320X-S 10/100M ethernet card.
No I don't run any scripts.....

-- 
Bülent Açikgöz
DBA & Sytem Administrator

Mobile: +90 532 5639505
Work  : +90 312 2103810
Adress: ODTU MM Binasi 3.Kat No:320 
Balgat/ANKARA/TURKIYE

There is no crueler tyranny than that which is perpetrated under the shield of law and in the name of justice.