[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: cdrecord issue



On Mon, 2004-12-06 at 01:43, Christian Del Pino wrote:
> Okay, now that it looks that it is writing CDs, I went to burn the first
> iso image of fc3. Here is what I received using cdrecord:
> Success. read buffer: scsi sendcmd: no error
> CDB:  3C 00 00 00 00 00 00 FC 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 00 00 00 10 87 69 65 80 08 03 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
> (ultra-dma/32))  Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 64512
> cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
> cdrecord: Permission denied. WARNING: Cannot set priority using
> setpriority().
> cdrecord: WARNING: This causes a high risk for buffer underruns.
> cdrecord: fifo was 0 times empty and 47 times full, min fill was 79%.
> 
> It seems to burn small files with no problem, but when I use large
> files, I get the same message.

I see the same issue here. I suspect it's due to either the newer kernel
or a cdrecord.

try lowering down your burn speed. 8x works for my 24x laptop Burner.

anything over that, I'll make coasters.
> 
> I have tried searching through the archives, but I couldn't find issue
> similar to mine.

Oh.. there are.. There certainly are...

--
Ow Mun Heng
Gentoo/Linux on D600 1.4Ghz 
Neuromancer 10:59:31 up 2:01, 6 users, 0.24, 0.61, 0.48 



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]