CD burning problem

[Steve Fink]

On Sun, 2004-12-19 at 01:50 +0100, Jim Dishaw (dishawjp) wrote:
> Steve wrote:
> >#diff lshal-no-media.txt lshal-with-media.txt
> 
> I did as you suggested (except for changing the output 
> redirection from "<" to ">") and got the following output 
> from the diff command
> :
> [root at eunix ~]# diff lshal-with-media.txt lshal-no-media.txt
> 2c2
> < Dumping 34 device(s) from the Global Device List:
> ---
> > Dumping 33 device(s) from the Global Device List:
> 4,35d3
> < udi = '/org/freedesktop/Hal/devices/block_3_64-0'
> <   info.udi = '/org/freedesktop/Hal/devices/block_3_64-0'  (string)
> <   volume.disc.is_rewritable = false  (bool)
> <   volume.disc.is_appendable = false  (bool)
> <   volume.disc.is_blank = true  (bool)
> <   volume.disc.has_data = false  (bool)
> <   volume.disc.has_audio = false  (bool)
> <   volume.disc.type = 'cd_r'  (string)
> <   volume.size = 2048  (0x800)  (uint64)
> <   volume.block_size = 2048  (0x800)  (int)
> <   volume.num_blocks = 4  (0x4)  (int)
> <   volume.is_disc = true  (bool)
> <   volume.is_mounted = false  (bool)
> <   volume.mount_point = ''  (string)
> <   volume.label = ''  (string)
> <   volume.uuid = ''  (string)
> <   volume.fsversion = ''  (string)
> <   volume.fsusage = ''  (string)
> <   volume.fstype = ''  (string)
> <   info.product = 'Volume'  (string)
> <   info.parent = '/org/freedesktop/Hal/devices/block_3_64'  (string)
> <   info.category = 'volume'  (string)
> <   info.capabilities = 'block volume'  (string)
> <   info.bus = 'block'  (string)
> <   block.no_partitions = true  (bool)
> <   block.have_scanned = false  (bool)
> <   block.is_volume = true  (bool)
> <   block.device = '/dev/hdb'  (string)
> <   block.major = 3  (0x3)  (int)
> <   block.minor = 64  (0x40)  (int)
> <   block.storage_device = '/org/freedesktop/Hal/devices/block_3_64'  (string)
> <
> 479d446
> <   volume.is_partition = false  (bool)
> 517c484
> <   block.have_scanned = true  (bool)
> ---
> >   block.have_scanned = false  (bool)
> 894c861
> < Dumped 34 device(s) from the Global Device List:
> ---
> > Dumped 33 device(s) from the Global Device List:
> [root at eunix ~]#
> 
> This would seem to indicate that the problem is not with 
> hal, if I understand this correctly.  I have tried burning 
> as both normal user and root with no difference, which would 
> seem to indicate that it is not a permissions error.  At 
> first I was thinking that it was another SELinux-udev issue 
> but this also seems not to be the case.  I'm really doing 
> a lot of head scratching here.  I do know that it's not 
> hardware since I can burn by booting to FC2.
> 
> Thanks for the response and any further input sincerely 
> appreciated.
> 
> Jim
> 
> 
> 
> -- 
> This is an email sent via the webforum on http://fcp.homelinux.org
> 

You're correct, the change indicates the problem is probably not hal.

Best of Luck,

Steve