[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: How to reach a computer by hostname on a LAN?



Jason Powers wrote:

> Is your router also handing out the hostnames? In that case, can it be
> activated as a DNS? I usually recommend the common cheesy blue linksys
> routers to my users, and I know they can do that, I assume others can.
> 
> The host map or host table (DNS) is like the White Pages, it's what your
> computer uses to look up IPs for hostnames and hostnames for IPs.
> 
> The DNS your ISP hands you is their copy of the public one, but you are
> running a local domain (the 192.168.1.x subnet) which their server will
> not have - your internal hostnames are not listed in their phone book,
> and won't be.
> 
> Normal DHCP config hands out DNS as well as IP, so the router gets it
> from your ISP and gives it to the machines. Most routers will let you
> use them as a DNS, so you can tell it to keep a table and then append
> the router as one of the DNS it assigns to your linux boxes.
> 
> You'll probably want to look up the configuration process in the
> instruction manual BEFORE you try to set it, because if you make a
> mistake you won't be able to see the internet until you fix it, so
> download the documentation now if you don't have the booklet.
> 
> Alternatively you can alter one of the machines to be a DNS but then you
> have to assign it manually in the other machine or in the router, it's
> easier if there are only 2 or 3 machines to use the router if it is
> capable.
> 
> While you're in the router, change its internal address to 192.168.1.100
> and have it assign IPs starting with .101, .102, etc. leaving it at .1
> is not as bad as keeping the factory default password, but it's still
> asking for trouble.
> 
> Jason
> 
> Christopher J. Bottaro wrote:
>> Simple setup.  I have a router that assigns IP addresses by DHCP.  I have
>> two linux machines:  compa and compb which get their IP addresses using
>> DHCP with the router.  From compa, I want to be able to say "ping compb"
>> instead of having to use ifconfig on compb to figure out what its IP
>> address is, then ping it (i.e. "ping 192.168.1.3").
>> 
>> How is this possible?  Manually editing the /etc/hosts file doesn't work
>> because the IP addresses can change at boot (or whenever DHCP is used to
>> get a new address).
>> 
>> Thanks.

Thanks for the great reply.  I have a couple of problems though...

It seems my router does what I want (I think).  It it setup as a DHCP
server.  I have 3 computers:
semaphore (linux)
mutex (winxp)
mobile (linux, wireless)
When I go to "connected devices" in my router setup, I see 3 entries:
--- 192.168.1.100
SEMAPHORE 192.168.1.101
--- 192.168.1.102
Problem number 1:  Why isn't mutex and mobile giving their hostnames to the
router?
Problem number 2:  "ping semaphore" from mutex (the winxp machine) works,
but "ping semaphore" from mobile gives me "unknown host".  What is up with
that?  Why can the win32 machine resolve semaphore properly and the linux
machine doesn't?

Its a Netgear WGR614v5 router, btw.

Thanks for the help, I can't wait to get this problem licked...I've been
wanting to solve it for a long time.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]