USB Sense Errors When Plugging in Flash Disk

[Robert L Cochran]

Whenever I plug in my A-Data USB flash drive, these messages appear in 
/var/log/messages. Is there a fix for the errors?

Dec 30 21:24:18 bobcp4 kernel: usb 1-5: new high speed USB device using 
address 5
Dec 30 21:24:18 bobcp4 kernel: scsi6 : SCSI emulation for USB Mass 
Storage devices
Dec 30 21:24:18 bobcp4 kernel:   Vendor: USB 2.0   Model: Flash 
Disk        Rev: 0.00
Dec 30 21:24:18 bobcp4 kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 02
Dec 30 21:24:18 bobcp4 kernel: SCSI device sdc: 1024000 512-byte hdwr 
sectors (524 MB)
Dec 30 21:24:18 bobcp4 kernel: sdc: Write Protect is off
Dec 30 21:24:18 bobcp4 kernel: sdc: assuming drive cache: write through
Dec 30 21:24:18 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:18 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 kernel:  sdc: sdc1
Dec 30 21:24:19 bobcp4 kernel: Attached scsi removable disk sdc at 
scsi6, channel 0, id 0, lun 0
Dec 30 21:24:19 bobcp4 scsi.agent[7069]: disk at 
/devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0/host6/6:0:0:0
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0
Dec 30 21:24:19 bobcp4 fstab-sync[7156]: added mount point 
/media/usbdisk for /dev/sdc1
Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code 
= 8000002
Dec 30 21:24:19 bobcp4 kernel:  Sense class 7, sense error 0, extended 
sense 0

This is on an MSI K8N Neo2 Platinum (Socket 939 -- AMD 64) motherboard. 
I am running Fedora Core 3 x86_64, which is kept fully up-to-date with 
the latest updates, on this. I also see the same messages on a Pentium 4 
system I just installed Fedora Core 3 (x86) on. That system is also 
fully up-to-date.

Thanks

Bob Cochran