USB Devices not working

[Khürt Williams]

Thanks for the info.  I got the camera working.  The camera entries were 
already in the /etc/updfstab.conf.default.   mount /dev/sda1 
/mnt/camera/ did the trick.
I am still working on the Hitachi drive.

Shawn Iverson wrote:

>  
>
>>From: Khurt Williams [mailto:khurtwilliams at verizon.net]
>>Sent: Saturday, January 31, 2004 1:25 PM
>>
>>I can not get my USB devices to work under Fedora Core 1. I am trying
>>
>>to get my Sony DSC-S70 digital camer to be recognised by the 
>>system to 
>>no avail.  Other USB devices fail to be recognised as well.  My USB 
>>drive is not recognised.
>>
>>Here is the output from syslog when the Sony DSC-S70 is connected.
>>
>>Jan 31 10:45:22 cypher kernel: hub.c: new USB device 
>>00:07.2-1, assigned 
>>address 4
>>Jan 31 10:45:25 cypher usb.agent[5456]: missing kernel or user mode 
>>driver usb-storage
>>    
>>
>
>See bugzilla report:  
>https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=113787
>
>[snip]
>
>  
>
>>Jan 31 10:54:05 cypher kernel: sda : block size assumed to be 
>>512 bytes, 
>>disk size 1GB.
>>Jan 31 10:54:05 cypher kernel: sda: test WP failed, assume 
>>Write Enabled
>>Jan 31 10:54:05 cypher kernel:  sda: I/O error: dev 08:00, sector 0
>>Jan 31 10:54:05 cypher kernel:  I/O error: dev 08:00, sector 0
>>Jan 31 10:54:05 cypher kernel:  unable to read partition table
>>Jan 31 10:54:05 cypher kernel: sda: Unit Not Ready, sense:
>>Jan 31 10:54:05 cypher kernel: Info fld=0xa00 (nonstd), 
>>Current 00:00: 
>>sense key Not Ready
>>Jan 31 10:54:05 cypher kernel: sda : READ CAPACITY failed.
>>Jan 31 10:54:05 cypher kernel: sda : status = 1, message = 
>>00, host = 0, 
>>    
>>
>
>These messages are ok.  They mean you unplugged your USB device.
>
>[snip]
>
>  
>
>>USB drive
>>
>>Jan 31 10:55:19 cypher kernel: hub.c: new USB device 
>>00:07.2-2, assigned 
>>address 5
>>Jan 31 10:55:19 cypher kernel: scsi1 : SCSI emulation for USB Mass 
>>Storage devices
>>Jan 31 10:55:19 cypher kernel: usb-uhci.c: interrupt, status 
>>3, frame# 1900
>>Jan 31 10:55:19 cypher kernel:   Vendor: HITACHI_  Model: 
>>DK23DA-20         Rev: 00J2
>>    
>>
>
>See the model DK23DA-20 and vendor HITACHI?  You may need to add an entry to
>/etc/ubdfstab.conf.default to prepare the mounting of the usb device.  Your
>Sony DSC-S70 will have a description of its own that you can use to make an
>entry.
>
>  
>
>>Jan 31 10:55:19 cypher kernel:   Type:   
>>Direct-Access                      ANSI SCSI revision: 02
>>Jan 31 10:55:19 cypher kernel: Attached scsi disk sdb at 
>>scsi1, channel 
>>0, id 0, lun 0
>>Jan 31 10:55:19 cypher kernel: SCSI device sdb: 39070081 
>>512-byte hdwr 
>>sectors (20004 MB)
>>Jan 31 10:55:19 cypher kernel:  sdb: sdb1 sdb2
>>Jan 31 10:55:22 cypher usb.agent[6891]: missing kernel or user mode 
>>driver usb-storage
>>    
>>
>
>Same issue.
>
>
>Also, once you are have troubleshooted your issue, always manually unmount
>your device before unplugging it, especially if you are performing write
>operations to it.
>
>
>  
>