Hauppauge PVR-250 iTVC16 (CX23416) problem

[Tom Taylor]

Hi Mick & list:

Look at mythTV 
  www.mythtv.org 
  www.wilsonet.com/mythtv/   **** this is using Fedora Core2

HTH, Tom

On Monday 05 July 2004 09:43, Mick Mearns wrote:
> Hello List;
>   I have the above video capture card.
> It works fine with the w98/XP drivers.
>
> I can detect it under Fedora:
> [mick at athlon mick]$ su -
> Password:
> [root at athlon root]# lspci -v
> 01:0a.0 Multimedia video controller: Internext Compression Inc iTVC16
> (CX23416) MPEG-2 Encoder (rev 01)
>         Subsystem: Hauppauge computer works Inc. WinTV PVR 250
>         Flags: bus master, medium devsel, latency 32, IRQ 9
>         Memory at d8000000 (32-bit, prefetchable)
>         Capabilities: [44] Power Management version 2
>
> dmesg:
> Linux video capture interface: v1.00
> ivtv: version magic '2.6.6-1.435.2.3 586 REGPARM 4KSTACKS gcc-3.3'
> should be '2.6.6-1.435.2.3 686 REGPARM 4KSTACKS gcc-3.3'
> ivtv: version magic '2.6.6-1.435.2.3 586 REGPARM 4KSTACKS gcc-3.3'
> should be '2.6.6-1.435.2.3 686 REGPARM 4KSTACKS gcc-3.3'
> ivtv: version magic '2.6.6-1.435.2.3 586 REGPARM 4KSTACKS gcc-3.3'
> should be '2.6.6-1.435.2.3 686 REGPARM 4KSTACKS gcc-3.3'
> ivtv: version magic '2.6.6-1.435.2.3 586 REGPARM 4KSTACKS gcc-3.3'
> should be '2.6.6-1.435.2.3 686 REGPARM 4KSTACKS gcc-3.3'
>
> I have tried installing the ivtv module and mythtv.
> I just seem to be going in circles.
>
> [root at athlon root]# cd /home/mick/TV-*/ivtv
> [root at athlon ivtv]# ls *.rpm
> atrpms-56-1.rhfc2.at.i386.rpm
> ivtv-0.1.10-37_pre2_ck97v.rhfc2.at.i386.rpm
> ivtv-firmware-2.02.023-3.at.i386.rpm
> kernel-module-ivtv-2.6.6-1.435.2.3-0.1.10-37_pre2_ck97v.rhfc2.at.i586.rpm
> perl-Config-IniFiles-2.38-2.rhfc2.at.noarch.rpm
> perl-Tk-804.027-8.rhfc2.at.i386.rpm
> perl-Video-Frequencies-0.03-2.rhfc2.at.noarch.rpm
> perl-Video-ivtv-0.12-5.1.rhfc2.at.i386.rpm
>
> [root at athlon ivtv]# cat /usr/src/*3/.config
> # Video Adapters
> #
> CONFIG_VIDEO_BT848=m
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_W9966 is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_DPC is not set
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> CONFIG_VIDEO_CX88=m
>
> (note no ivtv module.)
>
> my kernel is [root at athlon ivtv]# uname -r
> 2.6.6-1.435.2.3
>
> I also have latest 2.6.7-bk17 kernel
> I tried the ivtv patch-2.6.7-mjb1 which crashed the compile.
>
> I also burned and booted
> KnoppMythR4V4.1.iso - card not detected.
> Also Knoppix 3.5 - same
>
>
> I have a nasty feeling that the iTVC16 )CX23416) chip is not supporetd.
>
>
> Thanks
>   Mick
>
> =====
> Dogs have Masters - Cats have Staff!
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - 50x more storage than other providers!
> http://promotions.yahoo.com/new_mail

-- 
---
Tom Taylor
registered linux user #263467