Ethernet card does not work with FC2

[John Morrison]

On Wed, 2004-07-21 at 11:47, Andrea Marin wrote:
> Hi Alberto,
> 
> you can configure all your network-interface in
> /etc/sysconfig/network-script.
> 
> In this folder probably you will find more file for more
> networks-interface that your system have.
> For configure the eth0 interface you must edit the file "ifcfg-eth0" and
> in this file you can write all your option 
> 
> this is an example:
> 
> # Silicon Integrated Systems [SiS]|SiS900 PCI Fast Ethernet
> DEVICE=eth0                      //This is the name
> BOOTPROTO=static           //This is the boot protocol static/dhcp
> BROADCAST=XXX.XXX.XXX.XXX       //IP addr
> HWADDR=XX:XX:XX:XX:XX:XX        //IP addr 
> IPADDR=XXX.XXX.XXX.XXX          //IP addr
> NETMASK=XXX.XXX.XXX.XXX         //IP addr 
> NETWORK=XXX.XXX.XXX.XXX         //IP addr
> ONBOOT=yes                      //if is activate on boot or not
> TYPE=Ethernet                   //type of the layer 2 protocol 
> 
> 
> Bye Andrea
> On Wed, 2004-07-21 at 12:11, Alberto M R Davila wrote:
> > Hi,
> > 
> > The "network device control" is like this:
> > 
> > Status Device Nickname
> > Active eth0    eth0
> > 
> > Looks OK but does * not * work ... how I could configure manually ?
> > 
> > Thanks, Alberto
> > 
> > 
> > 
> 
> 
Alberto,

try the following as root: 
vim /etc/sysconfig/networking/devices/ifcfg-eth0

John