Leadtek WinFAst TV2000 Deluxe - no sound.

[Mick Mearns]

Hello List;
  I have the above card and cannot get any sound under Linux.
I used "Linux Help - Corey's TvTuner Guide.html" to get the card to
work.
Now its showing video fine, the radio runes fine - but no sound from
either.

Both the TV and the radio work under WinXP - so the hardware is ok.
I have tries "xawtv" and "tvtime"

here is my /etc/modprobe.conf:
# i2c
alias char-major-89     i2c-dev
options i2c-core        i2c_debug=1
options i2c-algo-bit    bit_test=1

# bttv
alias    char-major-81     videodev
alias    char-major-81-0   bttv
options  bttv  card=13 radio=1 tuner=2 gbuffers=4

dmesg:
bttv: driver version 0.9.15 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 11, latency: 32, mmio:
0xd8000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is
107d:6606
bttv0: using: AVerMedia TVCapture 98 [card=13,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [11]
bttv0: Avermedia eeprom[0xffff]: tuner=Unknown type radio:yes remote
control:yes
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not
found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
bt878 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: PLL can sleep, using XTAL (28636363).

lsmod:
Module                  Size  Used by
tuner                  18320  0
tvaudio                20492  0
bttv                  143564  1
video_buf              17156  1 bttv
v4l2_common             5120  1 bttv
btcx_risc               3976  1 bttv
videodev                7424  2 bttv
loop                   12936  2
snd_pcm_oss            49192  0
snd_mixer_oss          17536  1 snd_pcm_oss
snd_intel8x0           29960  1
snd_ac97_codec         65924  1 snd_intel8x0
snd_pcm                85000  2 snd_pcm_oss,snd_intel8x0
snd_timer              21252  1 snd_pcm
snd_page_alloc          9096  2 snd_intel8x0,snd_pcm
snd_mpu401_uart         6400  1 snd_intel8x0
snd_rawmidi            20516  1 snd_mpu401_uart
snd_seq_device          6664  1 snd_rawmidi
snd                    46180  11
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               7520  1 snd
sunrpc                130660  1
iptable_filter          2432  0
ip_tables              16256  1 iptable_filter
sg                     33440  0
nls_iso8859_1           3968  2
ohci_hcd               18692  0
ehci_hcd               28164  0
aic7xxx               162104  0
sd_mod                 17152  0
scsi_mod              104140  3 sg,aic7xxx,sd_mod

kernel:
2.6.8-rc2-Mick

I use KDE and have enabled all inputs/outputs and maxed all sliders in
kmix.

This TV card uses an external cable from line-out to soundcard line-in.
That is why I made sure that it worked under XP.

Any hints?
 Thanks 
    Mick M.

=====
Dogs have Masters - Siamese Cats have Staff!


		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail