Scanner USB

[Heber Vazquez]

My scanner don't work my latest try...


[alpha:root] [/home/heberv]$ scanimage -L
device `v4l:/dev/video0' is a Noname DC10plus[0] virtual device
device `snapscan:libusb:003:002' is a AGFA SNAPSCAN flatbed scanner
[alpha:root] [~]$ chmod a+w /proc/bus/usb/003/002
[alpha:root] [~]$ ls -la /proc/bus/usb/003/
total 0
dr-xr-xr-x  2 root root  0 Jun  9 08:03 .
drwxr-xr-x  6 root root  0 Jun  9 08:03 ..
-rw-r--r--  1 root root 43 Jun  9 08:03 001
-rw-rw-rw-  1 root root 57 Jun  9 18:26 002
[alpha:root] [~]$ xsane
[snapscan] Cannot open firmware file /path/to/your/firmware/file.bin.
[snapscan] Edit the firmware file entry in snapscan.conf.
[alpha:root] [~]$ chmod a+w /etc/sane.d/*.bin
[alpha:root] [~]$ ls -la /etc/sane.d/*.bin
-rw-rw-rw-  1 root root 30653 Jun  6 20:01 /etc/sane.d/u176v042.bin

snapscan.conf:
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /etc/sane.d/u176v042.bin

fstab:
none    /proc/bus/usb   usbfs   defaults,devmode=0666 0 0

[alpha:root] [/home/heberv]$ rpm -Uvh sane-backends-1.0.13-6.i386.rpm