SCSI Tape problem on FC2

[Don Woodward]

----- Original Message ----- 
From: "Terry Polzin" <fox3ec208 at wideopenwest.com>
To: "Don Woodward" <fedora at w-ent.com>; "For users of Fedora Core releases"
<fedora-list at redhat.com>
Sent: Thursday, November 11, 2004 14:47
Subject: Re: SCSI Tape problem on FC2


On Thursday 11 November 2004 13:56, Don Woodward wrote:
> Just added a SCSI card and TLZ10 tape drive to a system - getting the
> following message below.  Is this a known bug in FC2?  Running  kernel
> 2.6.5-1.358.
>
> TIA
>
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>         <Adaptec 2930CU SCSI adapter>
>         aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
> (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15)
>   Vendor: DEC       Model: TLZ10    (C) DEC  Rev: 04a8
>   Type:   Sequential-Access                  ANSI SCSI revision: 02
> st: Version 20040318, fixed bufsize 32768, s/g segs 256
> Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
> st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
> 1048575
> st0: Block limits 1 - 16777215 bytes.
> Debug: sleeping function called from invalid context at
> include/asm/semaphore.h:119
> in_atomic():0, irqs_disabled():1
> Call Trace:
>  [<0211691d>] __might_sleep+0x80/0x8a
>  [<129569c9>] ahc_linux_kill_dv_thread+0x4f/0x7b [aic7xxx]
>  [<1295b7b0>] ahc_linux_exit+0x18/0x2e [aic7xxx]
>  [<02126b19>] sys_delete_module+0x122/0x162
>  [<02137c1f>] unmap_vma_list+0xe/0x17
>  [<02137f64>] do_munmap+0xfe/0x108
>  [<02114408>] do_page_fault+0x0/0x446

>>So what are you attempting to do when you get these messges.  These look
like
>>boot stuff.  Also, the kernel is a bit old, you may want to consider
>>updating.

Yes, this is boot stuff from dmesg - I started an update earlier today -
hopefully that will fix it.

Thanks!

Don W.