FC3: ISDN loading failure

[antonio montagnani]

Alexander Dalloz ha scritto/wrote il giorno/on 30/11/2004 18:35:

>Am Di, den 30.11.2004 schrieb antonio montagnani um 18:20:
>
>  
>
>>I upgraded from FC2 to FC3, everything is o.k with the exception of the 
>>ISDN card.
>>    
>>
>
>How was it configured with FC2? With the hisax module, the
>hisax_fcpcipnp module (Fritz PCI version 2 card?) or the CAPI driver by
>AVM?
>
>  
>
I do not remember, not with the CAPI driver almost for sure.In the 
system-network-config, the card is shown as AVM PCI (Fritz!PCI)

>>During the start up I see the Failure red mark during loading of the 
>>ADSL system (that was working on FC2):
>>    
>>
>
>What does the ISDN card has to do with ADSL?
>
>  
>
My mistake,I apologize, it has to be read as ISDN system (I refer to the 
initial information during Fedora start-up, when I get to the ISDN line, 
rhgb procedure reverts to standard lines as this error is found.)

>>The card is recognized as from the output of sbin/lspci
>>    
>>
>
>  
>
>>00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System 
>>GmbH A1 IS DN [Fritz] (rev 02)
>>    
>>
>
>  
>
>> From the kernel start-up log I see:
>>
>>ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
>>HiSax: Linux Driver for passive ISDN cards
>>HiSax: Version 3.5 (module)
>>HiSax: Layer1 Revision 2.46.2.5
>>HiSax: Layer2 Revision 2.30.2.4
>>HiSax: TeiMgr Revision 2.20.2.3
>>HiSax: Layer3 Revision 2.22.2.3
>>HiSax: LinkLayer Revision 2.59.2.4
>>pnp: Device 00:01.00 activated.
>>pnp: Device 00:01.01 activated.
>>    
>>
>
>So the hisax module was loaded and the ISDN card initialized.
>
>  
>
>
>  
>
>>I do not see any ISDN module??? what does it mean and how to solve it???
>>    
>>
>
>Did you configure the device using system-config-network?
>  
>
No, not in Fc3, It was un upgrade from FC2, so it was configured in FC2, 
but automatically, I added only data for ppp connection (telephone 
number, user is password)

>Alexander
>
>
>  
>
Tnx for your help!!!

-- 

 Antonio M.

 ===================================================================
 Working with  Mozilla Thunderbird 0.9 on Redhat Linux Fedora Core 3
 ===================================================================
 ===================================================================
     Uso Mozilla Thunderbird 0.9 su Redhat Linux Fedora Core 3
		www.montagnani.org
 ===================================================================