TwinMOS Mobile disk IV & FC2
Tor Harald Thorland
linux at mis.no
Wed Oct 6 05:58:02 UTC 2004
tir, 05.10.2004 kl. 14.22 skrev James Wilkinson:
> Tor Harald Thorland wrote:
> >
> > I have turned them off now, and got the following:
> > Before the welcome to fedora..... I had some ACPI errors, it is too much
> > text to write down and reproduce her, is there some way to log the
> > startup text to a file or something?
>
> Well, if you boot correctly, you can look at /var/log/dmesg. That gets
> over-written each boot, though. That's at around line 843 of
> /etc/rc.d/rc.sysinit: you could alter this file (carefully) to make it
> save the log somewhere else, and earlier or later.
> >
I took a copy of this file when it booted correctly, and edited it on
another pc, to be the same as the text on my laptop, when it hang. I
have attached it to this mail if you could look at it.
The dmesg program should have an append option :-)
> > After the welcome i got the following:
> > (Freely translated from norwegian to english)
> > Setting hostname localhost [OK]
> > Initializing USB controller (ohci-hcd) [OK]
> > Mounting USB-filesystem [OK]
> >
> > Then the system hang....
>
> That's around line 220 of the same file. How are you at shell scripting?
> Can you put echo statements in at suitable places, so we can see where
> everything is hanging?
> >
I havent done this :-) But is it easy? It must be somwhere in this USB
mounting thing, because the next thing for it to carry out is checking
the file system..
> > Is there also a way to keep the whole starup in English instead of
> > norwegian?
> >
> It looks like this is picked up from /etc/sysconfig/i18n by about line
> 20 of /etc/init.d/functions.
>
> There are a number of ways of making sure that LANG gets set to en_US,
> en_GB, or C.
I will try this later today :-)
Thanx again!
Tor Harald
-------------- next part --------------
Linux version 2.6.8-1.521 (bhcompile at tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 122608
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118512 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Built 1 zonelists
Kernel command line: ro root=LABEL=/ acpi=off
The text above is from a normal working boot with acpi=off
The text below is from a hanging boot with ACPI=noirq
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c7000 soft=023c6000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1656.562 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 482000k/490432k available (2012k kernel code, 7672k reserved, 651k data, 140k init, 0k highmem)
Calibrating delay loop... 3276.80 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon (tm) 2000+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 189k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Usinc PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 10 *11)
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (N
ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL
ACPI-0154: *** Error: Method execution failed [\_BS_.PCI0.LPCB.LNKU._CRS] (N
ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL
ACPI: PCI Interrupt Link [LNKU] (IRQs 9) *0
ACPI: Embedded Controller [EC0] (gpe 25)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Using ALI IRQ Router
PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1097017837.4294966158:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (50C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP320/M chipset
agpgart: Maximum main memory to use for agp memory: 408M
agpgart: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Assigned IRQ 11 for device 0000:00:03.0
ttyS1 at I/O 0x8428 (irq = 11) is a 8250
ttyS2 at I/O 0x8440 (irq = 11) is a 8250
ttyS3 at I/O 0x8450 (irq = 11) is a 8250
ttyS4 at I/O 0x8460 (irq = 11) is a 8250
ttyS5 at I/O 0x8470 (irq = 11) is a 8250
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Warning: ATI Radeon IGP Northbridge is not yet fully tested.
ALI15X3: IDE controller at PCI slot 0000:00:04.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2040AT, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Slimtype COMBO LSC-24081M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 132.524 MHz
powernow: Found PSB header at 020f0600
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 18 PST tables. (Only dumping ones relevant to this CPU).
powernow: PST:12 (@020f06f2)
powernow: cpuid: 0x781 fsb: 133 maxFID: 0x3 startvid: 0xb
powernow: FID: 0x4 (5.0x [662MHz]) VID: 0x13 (1.200V)
powernow: FID: 0x7 (6.5x [861MHz]) VID: 0x13 (1.200V)
powernow: FID: 0xb (8.5x [1126MHz]) VID: 0xe (1.300V)
powernow: FID: 0xf (10.5x [1391MHz]) VID: 0xc (1.400V)
powernow: FID: 0x3 (12.5x [1656MHz]) VID: 0xb (1.450V)
powernow: SGTC: 13333
powernow: Minimum speed 662 MHz. Maximum speed 1656 MHz.
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
The rest here is from the working setup!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Assigned IRQ 11 for device 0000:00:02.0
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: irq 11, pci mem 20836000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:0f.0
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: irq 10, pci mem 20838000
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using address 2
input: USB HID v1.00 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2
EXT3 FS on hda3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
cdrom: open failed.
Adding 979924k swap on /dev/hda5. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-------------- next part --------------
Linux version 2.6.8-1.521 (bhcompile at tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 122608
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118512 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Built 1 zonelists
Kernel command line: ro root=LABEL=/ acpi=off
The text above is from a normal working boot with acpi=off
The text below is from a hanging boot with ACPI=noirq
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c7000 soft=023c6000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1656.562 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 482000k/490432k available (2012k kernel code, 7672k reserved, 651k data, 140k init, 0k highmem)
Calibrating delay loop... 3276.80 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon (tm) 2000+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 189k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Usinc PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 10 *11)
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (N
ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL
ACPI-0154: *** Error: Method execution failed [\_BS_.PCI0.LPCB.LNKU._CRS] (N
ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL
ACPI: PCI Interrupt Link [LNKU] (IRQs 9) *0
ACPI: Embedded Controller [EC0] (gpe 25)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Using ALI IRQ Router
PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1097017837.4294966158:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (50C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP320/M chipset
agpgart: Maximum main memory to use for agp memory: 408M
agpgart: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Assigned IRQ 11 for device 0000:00:03.0
ttyS1 at I/O 0x8428 (irq = 11) is a 8250
ttyS2 at I/O 0x8440 (irq = 11) is a 8250
ttyS3 at I/O 0x8450 (irq = 11) is a 8250
ttyS4 at I/O 0x8460 (irq = 11) is a 8250
ttyS5 at I/O 0x8470 (irq = 11) is a 8250
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Warning: ATI Radeon IGP Northbridge is not yet fully tested.
ALI15X3: IDE controller at PCI slot 0000:00:04.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2040AT, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Slimtype COMBO LSC-24081M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 132.524 MHz
powernow: Found PSB header at 020f0600
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 18 PST tables. (Only dumping ones relevant to this CPU).
powernow: PST:12 (@020f06f2)
powernow: cpuid: 0x781 fsb: 133 maxFID: 0x3 startvid: 0xb
powernow: FID: 0x4 (5.0x [662MHz]) VID: 0x13 (1.200V)
powernow: FID: 0x7 (6.5x [861MHz]) VID: 0x13 (1.200V)
powernow: FID: 0xb (8.5x [1126MHz]) VID: 0xe (1.300V)
powernow: FID: 0xf (10.5x [1391MHz]) VID: 0xc (1.400V)
powernow: FID: 0x3 (12.5x [1656MHz]) VID: 0xb (1.450V)
powernow: SGTC: 13333
powernow: Minimum speed 662 MHz. Maximum speed 1656 MHz.
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
The rest here is from the working setup!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Assigned IRQ 11 for device 0000:00:02.0
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: irq 11, pci mem 20836000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:0f.0
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: irq 10, pci mem 20838000
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using address 2
input: USB HID v1.00 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2
EXT3 FS on hda3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
cdrom: open failed.
Adding 979924k swap on /dev/hda5. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
More information about the fedora-list
mailing list