AVM Fritz Card and capi

[Alexander Dalloz]

Am Fr, den 15.10.2004 schrieb Ian Clough um 8:52:

> I am on FC2 and have upgraded to 2.6.8 - 521
> 
> I am trying to get my passive ISDN card - AVM Fritz working with my 
> application - Asterisk.
> 
> After some help from Alexander D. I changed /etc/sysconfig/isdncard
> The line
> MODULE=hisax
> is changed to:
> MODULE='hisax_fcpcipnp'
> my card now appears to function although it starts two times
>  In the log on boot up I see:-

> Oct 15 07:12:36 vigor11 kernel: ISDN subsystem Rev: 
> 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded

> Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI 
> v2 at 0000:02:05.0
> Oct 15 07:12:36 vigor11 kernel: HiSax module removed
> Oct 15 07:12:36 vigor11 kernel: ISDN-subsystem unloaded

ISDN is stopped here. You have to find out what is causing this
behaviour.

> Oct 15 07:12:36 vigor11 kernel: ISDN subsystem Rev: 
> 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
> Oct 15 07:12:36 vigor11 kernel: HiSax: Linux Driver for passive ISDN cards
> Oct 15 07:12:36 vigor11 kernel: HiSax: Version 3.5 (module)
> Oct 15 07:12:36 vigor11 kernel: HiSax: Layer1 Revision 2.46.2.5
> Oct 15 07:12:36 vigor11 kernel: HiSax: Layer2 Revision 2.30.2.4
> Oct 15 07:12:36 vigor11 kernel: HiSax: TeiMgr Revision 2.20.2.3
> Oct 15 07:12:36 vigor11 kernel: HiSax: Layer3 Revision 2.22.2.3
> Oct 15 07:12:36 vigor11 kernel: HiSax: LinkLayer Revision 2.59.2.4
> Oct 15 07:12:36 vigor11 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver 
> v0.1.0
> Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: Unknown parameter `type'

Here you have a misconfiguration.

> Oct 15 07:12:37 vigor11 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP 
> ISDN driver v0.0.1
> Oct 15 07:12:37 vigor11 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 
> (0)
> Oct 15 07:12:37 vigor11 kernel: HiSax: DSS1 Rev. 2.32.2.3
> Oct 15 07:12:37 vigor11 kernel: HiSax: 2 channels added
> Oct 15 07:12:37 vigor11 kernel: HiSax: MAX_WAITING_CALLS added
> Oct 15 07:12:37 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 
> (level, low) -> IRQ 5
> Oct 15 07:12:37 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI 
> v2 at 0000:02:05.0

> The card functions a little because I see messages in the log:-

Why "a little"? What do you miss?

> Oct 11 20:32:07 vigor11 kernel: isdn_tty: Incoming call without OAD, 
> assuming '0'
> Oct 11 20:32:07 vigor11 kernel: isdn_tty: call from 0 -> 693027 ignored
> 
> My problem is that I cannot use capi.
> [root at Vigor11 log]# capiinit
> ERROR: cannot load module kernelcapi
> 
> I then modprobe kernelcapi and capi but still see the same error message

What does "capiinfo" report?

> Ian

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.8-1.521smp 
Serendipity 17:22:06 up 1 day, 12:33, load average: 0.13, 0.24, 0.28 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20041015/9f1c1990/attachment-0001.sig>