FC2 as a geteway

[Hans Christian Studt]

Alexander Dalloz wrote:
>Am Mo, den 06.09.2004 schrieb Hans Christian Studt um 20:29:
>>I am trying to set up a FC2 PC (tux1700) as a gateway to the internet via my modem ppp0 and
>>another FC2 PC (tux) that will use the gateway through eth0.
>>
>>At the moment this does not work and I don't know if the problem is the gateway or the other PC
>>or both.
>>
>>Gateway PC
>Settings are ok.
>
>>Other PC
>Looks ok too, though ip_forward is not necessary here on the NATed
>client.
>
>Check your network settings on the client. The NAT router has to be the
>gateway and you have to be sure to have set valid DNS entries in
>/etc/resolv.conf.

Yes - after copying /etc/resolv.conf from the gateway it now works.

Thanks.


Mvh Hans Christian Studt
Private +45 48 79 79 89
Mobile +45 29 23 54 14
Business +45 36 14 54 14
mailto:hc at studt.dk http://hc.studt.dk
Powered by Linux 2.6.8-1.521