No usb or SCR331 card read under FC2

[John McBride]

Hi,

Under FC1 I see entries for my card reader in /proc/bus/usb/devices, 
dmesg, and lsusb when I plug/unplug it:

/proc/bus/usb/devices:
[snip]
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=04e6 ProdID=e001 Rev= 4.13
S:  Manufacturer=SCM Microsystems Inc.
S:  Product=SCRx31 USB Smart Card Reader
S:  SerialNumber=50100D14
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=16ms

dmesg:
[snip]
hub.c: new USB device 00:07.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x4e6/0xe001) is not claimed by any 
active driver.

/sbin/lsusb:
Bus 001 Device 003: ID 04e6:e001 SCM Microsystems, Inc.

I don't have a /proc/bus/usb/devices file under FC2, and dmesg shows 
nothing when I plug/unplug the device, and /sbin/lsusb is empty. Its 
like the usb is dead.

Any ideas?

Thanks,
John