[FC3] kernel-2.6.11-1.14_FC3 freezes on boot

[Bob Marcan]

Slava Bizyayev wrote:
> On Tue, 2005-04-19 at 06:11, Jim Cornette wrote:
> 
>>Yuandan Zhang wrote:
>>
>>>Michael Hennebry wrote:
>>>
>>>
>>>>On 16 Apr 2005, Slava Bizyayev wrote:
>>>>
>>>>
>>>>>I use kernel-2.6.10-1.770_FC3 on my HP OmniBook XE2 pretty happily.
>>>>>After updating kernel to kernel-2.6.11-1.14_FC3 I experience a strange
>>>>>behavior -- in the end of the boot (instead of X-login screen) machine
>>>>>freezes, and I cannot even get the terminal access with ctrl-alt-F1. Has
>>>>>someone experienced something similar? What's the work around?
>>>>>  
>>>
>>>Hi, I got exactly the same problem. I upgaded kernel from 
>>>kernel-2.6.10-1.770_FC3 on my HP nx5000 to kernel-2.6.11-1.14_FC3, Boot 
>>>freezed. I troed to boot to the old kernel kernel-2.6.10-1.770_FC3, it 
>>>froze too.
>>>
>>
>>If the kernel-2.6.10-1.770_FC3 used to work and then stopped working 
>>after upgrading to the kernel-2.6.11-1.14_FC3 version, using the 
>>original kernel might not be of much help. There is probably a problem 
>>related to something else that you installed along with the kernel 
>>update that is causing you problems.
>>
> 
> 
> In my case kernel-2.6.10-1.770_FC3 is running just fine when I'm quick
> enough to switch on boot...
> 
> Any other ideas?
> 
> Thanks,
> Slava
> 
> 

Intel mobo D845GBV:
kernel-2.6.11-1.14_FC3 starts fine with X.
After 1 hour or more just freezes.
Even over night with only daemons running.
Got some ACPI errors.
kernel-2.6.10-1.770_FC3 runs just fine.

mobo EP-61BXA-M (pre 2001 bios):
At boot it says the acpi can be forced by acpi=on
Same symptoms.
Lost complete installation (xfs fs).

Best regards, Bob

-- 
  Bob Marcan, Consultant                mailto:bob.marcan at snt.si
  S&T Hermes Plus d.d.                  tel:   +386 (1) 5895-300
  Slandrova ul. 2                       fax:   +386 (1) 5895-202
  1231 Ljubljana - Crnuce, Slovenia     url:   http://www.snt.si