Display problem HP zt1180
Markus Huber
humarfedoralists at yahoo.de
Thu Jan 6 17:35:34 UTC 2005
Will Starck wrote:
> Is there any hope for this laptop, or do I ebay it and buy another?
There is hope ;-)
> Display settings:
>
> Resolution: 1400 x 1050 24 bit
> Hardware: Monitor type LCD Panel 1400 x 1050
> Video Card: S3 Savage4 (any of the Savage 4s seem to work best)
>
> and xorg.conf:
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "LCD Panel 1400x1050"
> HorizSync 31.5 - 90.0
> VertRefresh 59.0 - 75.0
> Option "dpms"
> EndSection
I am on a HP zd7000 and xorg.conf needs a modeline in the monitor
section otherwise 1440x900 does not work.
To get your modeline you need to run gtf as root. In your case:
# gtf 1400 1050 75
The result looks something like:
[root at FC3 ~]# gtf 1440 900 75
# 1440x900 @ 75.00 Hz (GTF) hsync: 70.50 kHz; pclk: 136.49 MHz
Modeline "1440x900_75.00" 136.49 1440 1536 1688 1936 900 901 904
940 -HSync +Vsync
This is for my laptop, so don't copy and paste it. But copy and paste
_your_ result into the monitor section of xorg.conf.
Here the example of xorg.conf on my laptop (again: do _not_ copy and
paste _this):
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1440x900"
HorizSync 31.5 - 100.0
VertRefresh 59.0 - 75.0
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
Option "dpms"
EndSection
For your notebook I found two references for modelines on Linux:
http://homepages.which.net/~adrian.west/pavillion_subpages/thanasis_pavillion_xf86config.html
http://seclists.org/lists/linux-kernel/2003/Jul/att-6868/hp-zt1180-XF86Config
And there is a website which can "make" your modeline as well:
http://koala.ilog.fr/cgi-bin/nph-colas-modelines
Hope that helps
--
Regards
Markus Huber
More information about the fedora-list
mailing list