cdrecord , k3b , fc2
Manojav Sridhar
manojav at manojav.com
Fri Jan 21 15:18:56 UTC 2005
hi david,
so tried cdrecrod with this command.
user at mylinuxbox:~
$ cdrecord -v --eject dev=ATA:1,1,0
downloads/torrents/heidelberg-i386-DVD/FC3-i386-DVD.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
JA¶rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-l
nux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A208'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B (current)
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
cdrecord: Found DVD media: using cdr_mdvd.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1245184 = 1216 KB
Drive DMA Speed: 10934 kB/s 62x CD 7x DVD
FIFO size : 4194304 = 4096 KB
cdrecord: Drive does not support TAO recording.
cdrecord: Illegal write mode for this drive.
so then i tried -dao mode
user at mylinuxbox:~
$ cdrecord -v --eject -dao dev=ATA:1,1,0
downloads/torrents/heidelberg-i386-DVD/FC3-i386-DVD.iso
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
JA¶rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-l
nux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A208'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B (current)
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
cdrecord: Found DVD media: using cdr_mdvd.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1245184 = 1216 KB
Drive DMA Speed: 10915 kB/s 62x CD 7x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 2352 MB
Total size: 2701 MB (267:37.36) = 1204302 sectors
Lout start: 2701 MB (267:39/27) = 1204302 sectors
cdrecord: Operation not permitted. prevent/allow medium removal: scsi
sendcmd: no error
CDB: 1E 00 00 00 01 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1090802
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsi_set_streaming
Speed set to 11080 KB/s
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 1 of 2352 MB written (fifo 84%) [buf 86%]
12.9x.cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 E8 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 10 35 01 04 0E 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.011s timeout 200s
write track data: error after 1523712 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 04 00 00 00 00 10 35 01 04 0E 09 01 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Writing time: 37.735s
Average write speed 67.5x.
Fixating...
cdrecord: Success. flush cache: scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 10 09 01 BB 0E A0 80 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0xA0 Qual 0x80 (vendor unique sense code 0xA0) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 1000s
Trouble flushing the cache
Fixating time: 0.008s
cdrecord: Operation not permitted. prevent/allow medium removal: scsi
sendcmd: no error
CDB: 1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: fifo had 88 puts and 25 gets.
cdrecord: fifo was 0 times empty and 4 times full, min fill was 81%.
bad media? too fast? bad reader? i googled a bit and saw a lot of
suggestions.
thanks
manoj
David Hoffman wrote:
>On Fri, 21 Jan 2005 08:45:55 -0500, user Sridhar <user at user.com> wrote:
>
>
>>hey guys,
>>
>>i am having some trouble with k3b and cdrecord. i am trying to burn the
>>FC3 ISO. but the media check always fails. from what i can see from the
>>k3b debugging log. the last line looks a bit fishy.
>>
>>2465464320/2466410496 (100.0%) @2.4x, remaining 0:00
>>
>>i can see that its not written all the available bytes! can anyone help
>>me explan with this? i have a LG GSA-4082B with Verbatim DVD+R 8x media.
>>
>>
>>
>
>
>Since you are already starting with an ISO file, what happens if you try:
>cdrecord -v --eject dev=ATA:1,0,0 heidelberg-i386-DVD/FC3-i386-DVD.iso
>
>Of course you would have to set your "dev=" argument dependent on the
>results of running "cdrecord -scanbus".
>
>
>
More information about the fedora-list
mailing list