How do I get a USB CD-ROM working in Fedora Core 3?

john.sloan at rogers.com john.sloan at rogers.com
Mon Mar 21 22:08:20 UTC 2005 

Hi, all.

I have googled and googled, and I just can't seem to get this to work. I
have a Thinkpad X23 with an external CD-ROM drive that connects via USB. No
matter what I do, it is not recognised in FC3. There is no entry in /dev and
I can't figure out what the problem is. There are no /dev/scd* devices.

Anyone got any ideas??

JS

Here is dmesg:

Linux version 2.6.9-1.667 (bhcompile at tweety.build.redhat.com) (gcc version
3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000027f70000 (usable)
 BIOS-e820: 0000000027f70000 - 0000000027f7e000 (ACPI data)
 BIOS-e820: 0000000027f7e000 - 0000000027f80000 (ACPI NVS)
 BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM
available.
639MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 163696
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 159600 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v002 IBM                                   ) @ 0x000f73b0
ACPI: XSDT (v001 IBM    TP-1D    0x00001320  LTP 0x00000000) @ 0x27f745ab
ACPI: FADT (v001 IBM    TP-1D    0x00001320 IBM  0x00000001) @ 0x27f745ef
ACPI: SSDT (v001 IBM    TP-1D    0x00001320 MSFT 0x0100000d) @ 0x27f746a3
ACPI: ECDT (v001 IBM    TP-1D    0x00001320 IBM  0x00000001) @ 0x27f7df86
ACPI: BOOT (v001 IBM    TP-1D    0x00001320  LTP 0x00000001) @ 0x27f7dfd8
ACPI: DSDT (v001 IBM    TP-1D    0x00001320 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped
4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000 PID hash table entries: 4096
(order: 12, 65536 bytes) Detected 866.149 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache
hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 644036k/654784k available (2068k kernel code, 10192k reserved, 647k
data, 144k init, 0k highmem) Calibrating delay loop... 1712.12 BogoMIPS
(lpj=856064) Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps:        0383f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) III Mobile CPU       866MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 948k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 9 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play
Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11 Simple
Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts
during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1111277385.4294965971:0): initialized Total HugeTLB memory allocated,
0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (57 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 256M @ 0xd0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo Uniform
Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio Probing
IDE interface ide0...
hda: IC25N030ATCS04-0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=62016/15/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449) Initializing
IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices: 
 LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC97 Freeing unused kernel memory:
144k freed
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:A8:F1:D7
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 80202 usecs
intel8x0: clocking to 48000
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd
0000:00:1d.0: irq 11, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2
ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd
0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2
ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd
0000:00:1d.2: irq 11, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2
ports detected usb 2-1: new full speed USB device using address 2 Linux
Kernel Card Services
  options:  [pci] [cardbus] [pm]
SCSI subsystem initialized
Initializing USB Mass Storage driver...
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.0 [1014:0185]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.1 [1014:0185]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
scsi0 : SCSI emulation for USB Mass Storage devices
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1310712k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 usb
2-1: reset full speed USB device using address 2
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id
0 lun 0 USB Mass Storage device found at 2
usbcore: registered new driver usb-storage USB Mass Storage support
registered.
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377
0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex i2c /dev entries
driver
eth0: no IPv6 routers present
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using address 3
scsi1 : SCSI emulation for USB Mass Storage devices USB Mass Storage device
found at 3 usb 2-1: USB disconnect, address 3 usb 2-1: new full speed USB
device using address 4
scsi2 : SCSI emulation for USB Mass Storage devices

More information about the fedora-list mailing list