-s /tftpboot path in xinetd.d/tftp file
Mark Sargent
powderkeg at snow.email.ne.jp
Thu Mar 24 09:05:54 UTC 2005
Alexander Apprich wrote:
> Mark,
>
> Mark Sargent wrote:
>
>> Alexander Apprich wrote:
>>
>>>
>>>
>>> Mark Sargent wrote:
>>>
>>>> Paul Howarth wrote:
>>>>
>>>>> Mark Sargent wrote:
>>>>>
>>>>>> Edwin Dicker wrote:
>>>>>>
>>> [snip]
>>>
>>>> Hi All,
>>>>
>>>> hmmm, not outa the woods yet. Still getting the undefined error.
>>>>
>>>> Switch#copy run tftp
>>>> Source filename [running-config]? running-config
>>>> Destination IP address or hostname []? 192.168.168.12
>>>> Destination filename [running-config]? /tftpboot/running-config
>>>> Building configuration...
>>>> .....
>>>> %Error opening tftp://192.168.168.12//tftpboot/running-config
>>>> (Undefined error)
>>>>
>>>> Ok, lets run through my set up, again,
>>>>
>>>> dir permissions for tftpboot,
>>>>
>>>> [root at localhost tftpboot]# ls -alh
>>>> total 8.0K
>>>> drwxr-xr-x 2 root root 4.0K Mar 24 14:10 .
>>>> drwxrwxrwx 24 nobody nobody 4.0K Mar 24 12:55 ..
>>>>
>>>> above tftpboot is owned by nobody:nobody as per this site,
>>>>
>>>> http://www.linux.com/howtos/Clone-HOWTO/setting-up.shtml
>>>> is it right..? as wello as it's suggestions below for xinetd.d/tftp
>>>>
>>>> xinetd.d/tftp settings
>>>>
>>>> [root at localhost tftpboot]# cat /etc/xinetd.d/tftp
>>>> # default: off
>>>> # description: The tftp server serves files using the trivial file
>>>> transfer # protocol. The tftp protocol is often used to boot
>>>> diskless # workstations, download configuration files to
>>>> network-aware printers, # and to start the installation process for
>>>> some operating systems.
>>>> service tftp
>>>> {
>>>> socket_type = dgram
>>>> protocol = udp
>>>> wait = yes
>>>> user = root
>>>> server = /usr/sbin/in.tftpd
>>>> server_args = -c -s /tftpboot
>>>> disable = no
>>>> per_source = 11
>>>> cps = 100 2
>>>> flags = IPv4
>>>> }
>>>> Correct..?
>>>>
>>>> This site below is a little different,
>>>>
>>>> http://www.linuxhomenetworking.com/linux-hn/xinetd.htm
>>>> as it suggests creating the destination file prior to the transfer.
>>>> Ok, some questions, do I create the dest filename b4hand, and if
>>>> so, what ownership/permissions is required for it.? I'm lost.
>>>> Anyone..? Cheers.
>>>>
>>>> Mark Sargent.
>>>>
>>>
>>> My directory permissions
>>>
>>> root at elmstreet / # ll -d /var/tftpboot/
>>> drwxrwxrwx 3 root root 4096 Mar 24 07:17 /var/tftpboot//
>>
>>
>>
>> [root at localhost tftpboot]# ll -d /tftpboot/
>> drwxrwxrwx 2 root root 4096 Mar 24 14:10 /tftpboot/
>>
>>>
>>> Here's my /etc/xinetd.d/tftp
>>>
>>> root at elmstreet / # cat /etc/xinetd.d/tftp
>>> service tftp
>>> {
>>> socket_type = dgram
>>> protocol = udp
>>> wait = yes
>>> user = root
>>> server = /usr/sbin/in.tftpd
>>> server_args = -c -s /var/tftpboot
>>> disable = no
>>> per_source = 11
>>> cps = 100 2
>>> flags = IPv4
>>> }
>>>
>> [root at localhost ~]# cat /etc/xinetd.d/tftp
>> # default: off
>> # description: The tftp server serves files using the trivial file
>> transfer # protocol. The tftp protocol is often used to boot
>> diskless # workstations, download configuration files to
>> network-aware printers, # and to start the installation process for
>> some operating systems.
>> service tftp
>> {
>> socket_type = dgram
>> protocol = udp
>> wait = yes
>> user = root
>> server = /usr/sbin/in.tftpd
>> server_args = -c -s /tftpboot
>> disable = no
>> per_source = 11
>> cps = 100 2
>> flags = IPv4
>> }
>>
>>> Make sure no tftpd process is running... (kill it if u find 1)
>>>
>>> root at elmstreet / # ps auxwww | grep ftp
>>> nobody 4706 0.0 0.0 5004 572 ? Ss Mar07 0:01
>>> proftpd: (accepting connections)
>>> root 525 0.0 0.0 3928 556 pts/1 R+ 07:17 0:00 grep ftp
>>
>>
>>
>> [root at localhost tftpboot]# ps auxwww | grep ftp
>> root 6314 0.0 0.2 4276 680 pts/1 R+ 17:15 0:00 grep ftp
>>
>>>
>>> Restart xinetd
>>>
>>> root at elmstreet / # service xinetd restart
>>> Stopping xinetd: [ OK ]
>>> Starting xinetd: [ OK ]
>>>
>> [root at localhost tftpboot]# service xinetd restart
>> Stopping xinetd: [ OK ]
>> Starting xinetd:
>>
>>> Here I copy the startup-config from a cisco 3660 router
>>>
>>> gw-lan-1#copy startup-config tftp://10.0.0.129/startup
>>> Address or name of remote host [10.0.0.129]?
>>> Destination filename [startup]?
>>> !!!!!!!!!!!!
>>> 53297 bytes copied in 0.208 secs (256236 bytes/sec)
>>
>>
>>
>> Switch>en
>> Switch#copy run tftp://192.168.168.12/running-config
>> Source filename [running-config]?
>> Destination IP address or hostname [192.168.168.12]?
>> Destination filename [running-config]?
>> Building configuration...
>> .....
>> %Error opening tftp://192.168.168.12/running-config (Undefined error)
>>
>>>
>>> And here we go...
>>
>>
>>
>> Unfortunately, I ain't goin' nowhere.
>>
>>>
>>> root at elmstreet / # ll /var/tftpboot/startup
>>> -rw-rw-rw- 1 nobody nobody 53297 Mar 24 07:17 /var/tftpboot/startup
>>>
>>> Alex
>>>
>> I'm at a loss with this. Driving me nutz. Cheers.
>>
>
> Hmmm, can you ping 192.168.168.12 from the switch?
> gw-lan-1#ping 10.0.0.129
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.0.0.129, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
>
>> Mark Sargent.
>>
>
> Alex
Hi All,
yes, Alex, it's pingable from the switch,
Switch>ping 192.168.168.12
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.168.12, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1006 ms
Cheers.
Mark Sargent.
More information about the fedora-list
mailing list