CD-RW recording

Thu May 26 11:22:29 UTC 2005

I am trying to write on a TDK CD-RW support.When I start KB3 I get the 
following messages and nothing is written on same support.Any clue?? 
same problem with kernel 2.6.11-1.14_FC3 or 2.6.11-1.27_FC3.Is it 
connected to type of support???

===========================================================
End of KB3 output
mkisofs didn't complete in a clean way
cdrecord reported an unknown error (code 254)
unknown error (254)
This influences stability of recording process
====================================================================

Output of debug file
System
-----------------------
K3b Version:0.11.14
KDE Version: 3.3.1-2.12.FC3 Red Hat
QT Version: 3.3.4

cdrecord
-----------------------
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using 
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code 
version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 
1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 
JÃ¶rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in 
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'QSI     '
Identifikation : 'CDRW/DVD SBW242U'
Revision       : 'UU30'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using 
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data    12 MB       
Total size:       14 MB (01:25.10) = 6383 sectors
Lout start:       14 MB (01:27/08) = 6383 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11635 (97:26/65)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  0 (reserved val  0) 1T speed high:  4
  2T speed low:  0 (reserved val  5) 2T speed high:  0 (reserved val 12)
  power mult factor: 3 5
  recommended erase/write power: 3
  A1 values: 02 3A B0
  A2 values: 5C C6 26
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 353466
Speed set to 706 KB/s
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds.
 Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of   12 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 01 93 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 34.854s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
/usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in 
progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.038s timeout 200s
write track data: error after 825344 bytes
Writing  time:   75.088s
Average write speed   2.1x.
Fixating...
Fixating time:   20.895s
/usr/bin/cdrecord: fifo had 77 puts and 14 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 
84%.
BURN-Free was never needed.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -dao 
driveropts=burnfree -eject -data -tsize=6383s -

mkisofs
-----------------------
Unknown file type (unallocated) 
/home/antonio/.kde/share/apps/k3b/temp/dummydir0/.. - ignoring and 
continuing.
6383
INFO: UTF-8 character encoding detected by locale settings.
 Assuming UTF-8 encoded filenames on source filesystem,
 use -input-charset to override.
Unknown file type (unallocated) 
/home/antonio/.kde/share/apps/k3b/temp/dummydir0/.. - ignoring and 
continuing.
  7.86% done, estimate finish Thu May 26 13:04:56 2005
 15.90% done, estimate finish Thu May 26 13:04:50 2005
 23.56% done, estimate finish Thu May 26 13:04:48 2005
 31.40% done, estimate finish Thu May 26 13:04:47 2005

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset  
-appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND 
THE K3B TEAM -publisher  -preparer K3b - versione 0.11.14 -sysid LINUX 
-volset-size 1 -volset-seqno 1 -sort /tmp/kde-antonio/k3bXZwdta.tmp 
-rational-rock -hide-list /tmp/kde-antonio/k3bY2phEa.tmp 
-full-iso9660-filenames -iso-level 2 -path-list 
/tmp/kde-antonio/k3bDGYzfa.tmp 
/home/antonio/.kde/share/apps/k3b/temp/dummydir0/

-- 
 Antonio
=============================================================
Mail by Thunderbird 1.0.2 - Websurfing by Firefox 1.0.4
=============================================================
Linux Fedora Core 3 on Maxdata Eco 3200

=============================================================