nForce 4 Kernel Panic (DMA Problems)

[Nathaniel Husted]

Haha! The problem seems to be fixed. It turns out it was the rounded
cable that came with the MSI motherboard. The area between the master
and slave ata plugs must have been FUBAR because it ended up causing
the weird issues with DMA etc. Thanks for the help!

On 5/26/05, Nathaniel Husted <nhusted at gmail.com> wrote:
> The intriguing thing is that the only time errors occur in windows is
> using nvidia's own IDE driver. The system is rather stable if I keep
> the default windows drivers. Now, I wasn't to suprised about this
> because supposely that driver has had major issues in many different
> cases. I'll be working on troubleshooting if it is a disk problem when
> I image the linux drive on a different computer (or at least try).
> 
> I rather sure that the PSU is popping out enough power (occording to
> the mobo manual the 24 pin connector from the psu should work fine in
> the 26 pin power slot on the motherboard).
> 
> The support folk at Monarch Computer Systems (the folks I bought the
> motherboard from) have said they've heard issues with the ata
> controller that MSI uses to make the board but they didn't suggest
> sending it back in... so I might have to twist some arms for that. I
> am personally not looking forward to sending it in myself but I might
> just have to.
> 
> I was hoping I might just need to recompile the kernel and enable a
> couple options or it just wasn't supported yet. This just happens to
> be one of the most confounding computer problems I've run in to in
> quite a while.
> 
> On 5/26/05, Klaasjan Brand <klaasjan at gmail.com> wrote:
> > If both operating systems are producing errors it's almost always a
> > hardware related problem.
> > First, check if the power supply is delivering enough power. A broken
> > psu can cause hard disk problems.
> > The nforce 4 is actively cooled. Check if the fan is still running!
> > Since you're running 3 disks maybe it's an issue with one of the
> > drives. Try booting with one disk connected to see if you can
> > reproduce the problem.
> > If everything else fails return the motherboard...
> >
> > Klaasjan
> >
>