Is my hard drive ok ?
Franck Y
franck110 at gmail.com
Wed Nov 30 06:13:12 UTC 2005
Hello FOlks,
It a maxtor hard drive.
I will try to look in maxtor website.
What do you mean bu the count is stable ?
On 11/30/05, Kam Leo <kam.leo at gmail.com> wrote:
> On 11/29/05, John Summerfied <debian at herakles.homelinux.org> wrote:
> > Bob Gustafson wrote:
> > > I would back up data on disk and retire disk as soon as possible.
> > Why is that?
> >
> > If you're frighted by the CRC errors, I don't think you should be,
> > Especially if the count is stable.
> >
> >
> > I'd enrol in the smartmon tools list at sf.net and ask advice there.
> > There, there are folk who know what they're talking about and,
> > importantly, that I know know what they're talking about.
> >
> >
> > >
> > >
> > > Franck Y wrote:
> > >
> > >> Fellows,
> > >>
> > >> Is My hard drive ok ?
> > >> I did a long test and every thing was ok !
> > >> But i see the pre-fail
> > >> Is my hard drive ok or you think i have to change it
> > >> Thanks
> > >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> > >> UPDATED WHEN_FAILED RAW_VALUE
> > >> 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail
> > >> Always - 0
> > >> 3 Spin_Up_Time 0x0007 128 125 021 Pre-fail
> > >> Always - 6133
> > >> 4 Start_Stop_Count 0x0032 100 100 040 Old_age
> > >> Always - 74
> > >> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> > >> Always - 0
> > >> 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
> > >> Always - 0
> > >> 9 Power_On_Hours 0x0032 098 098 000 Old_age
> > >> Always - 1564
> > >> 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail
> > >> Always - 0
> > >> 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail
> > >> Always - 0
> > >> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> > >> Always - 73
> > >> 194 Temperature_Celsius 0x0022 101 091 000 Old_age
> > >> Always - 49
> > >> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> > >> Always - 0
> > >> 197 Current_Pending_Sector 0x0012 200 200 000 Old_age
> > >> Always - 0
> > >> 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
> > >> Always - 0
> > >> 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
> > >> Always - 317
> > >> 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
> > >> Offline - 0
> > >>
> > >> --
> > >> Franck
> > >>
> > >>
> > >>
> > >
> >
> > Cheers
> > John
> >
>
> You don't have to rely upon smartmon. You can always use the
> diagnostic provided by the manufacturer of your drive. If you bought
> an OEM drive go to the manufacturer's web site and download it.
> Otherwise dig out that floppy or CDROM and run the test(s).
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
--
Franck
More information about the fedora-list
mailing list