FIXED: upgrade to 2.6.13-1.1526_FC4 breaks boot w/ LSI SCSI

[Gilboa Davara]

Try scrolling up and check if the kernel detected the LSI SCSI card.

Gibloa

On Fri, 2005-10-21 at 15:49 -0700, Antony Nguyen wrote:
> I didn't see a post on the Fedora list about this, but I have seen it on 
> other forums/newsgroups.
> 
> Basically, running a yum update to the latest kernel (2.6.13-1.1526_FC4) 
> breaks booting on a drive attached to an LSI SCSI card.  The boot error is 
> usually the generic one quite a few people have seen:
> 
> mkrootdev: label / not found
> Mouting root file system
> mount: error 2 mounting ext3
> Switching to new root
> ERROR opening /dev/console!!!: 2
> error dup2'ing fd of 0 to 0
> error dup2'ing fd of 0 to 1
> error dup2'ing fd of 0 to 2
> unmounting old /proc
> unmounting old /sys
> switchroot: mount failed: 22
> Kernel panic -not syncin: Attempted to kill init!
> 
> I'd rather not have to type out the entire explanation again.  Just read 
> the following link.  I'm "Ant":
> 
> http://forums.fedoraforum.org/showthread.php?p=387546
> 
> Take care,
> Tony
> 
> 
> -- 
> 
> A sadist is a masochist who follows the Golden Rule.
> 
>