[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Share internet connection/make a small server




--- Jeff Vian <jvian10 charter net> wrote:

> On Thu, 2005-09-01 at 04:53 -0700, Antonio Olivares
> wrote:
> > 
> > --- Jeff Vian <jvian10 charter net> wrote:
> > 
> > > On Wed, 2005-08-31 at 17:16 -0700, Antonio
> Olivares
> > > wrote:
> > > > 
> > > > --- Jeff Vian <jvian10 charter net> wrote:
> > > > 
> > > > > On Wed, 2005-08-31 at 12:20 -0700, Antonio
> > > Olivares
> > > > > wrote:
> > > > > > 
> > > > > > --- Antonio Olivares
> <olivares14031 yahoo com>
> > > > > wrote:
> > > > > > 
> > > > > > 
> > *nat
> > :PREROUTING ACCEPT [759:76421]
> > :POSTROUTING ACCEPT [4:288]
> > :OUTPUT ACCEPT [394:23805]
> > -A POSTROUTING -o eth1 -j MASQUERADE
> > -A POSTROUTING -o eth0 -j MASQUERADE
> > -A POSTROUTING -o eth1 -j MASQUERADE
> > -A POSTROUTING -o eth0 -j MASQUERADE
> > -A POSTROUTING -o eth1 -j MASQUERADE
> > -A POSTROUTING -o eth1 -j MASQUERADE
> > COMMIT
> > # Completed on Wed Aug 31 07:52:24 2005
> > [root rio ~]# cat /proc/sys/net/ipv4/ip_forward
> > 1
> > [root rio ~]#  
> > 
> > Thanks for all your help and suggestions.  It will
> > work.  It is just a matter of finding where things
> are
> > stopping.
> > 
> > Best Regards,
> > 
> > Antonio   
> > 
> 
> Attached is a basic script for a firewall/router
> like you are using.
> 
> Simply put it somewhere on the linux box, make it
> executable, then as
> root run it.
> 
> After running this script, rerun "service iptables
> save" to save the
> rules so they load automatically when you reboot.
> 
> It should load all the rules you need for a dynamic
> external address on
> eth0, a fixed internal address on eth1,  and DNS on
> the external
> network.
> 
> To test that it works, simply retry (from the
> windows box) the ping
> commands I gave earlier, and even try a ping to
> www.yahoo.com.
> If they all work then you should be all set.
> 
> This was generated using fwbuilder which is readily
> available on the net
> from  www.fwbuilder.org or on sourceforge.
> 
> HTH
> Jeff
> 

Now, I cannot access the local network and the
internet from the machine.  The eth0 device was
assigned an IP according to its MAC address and now it
does not work, it says that it is active.  When I shut
down the machine it gave me some weird message which I
do not know how to get since I am sending this email
from the other machine which has internet access in my
classroom.  
Is there a way to solve this issue?

TIA

Antonio


		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]