[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: not able to browse the internet with 2 lan cards on Fc3



Ankush Grover wrote:
    Remove the GATEWAY= entries from all of your ifcfg-* files and replace
    them with a single GATEWAY=ip.addr entry in /etc/sysconfig/network,
    where ip.addr is the IP address of your default gateway/router.

    It removed the GATEWAY entries from ifcfg-eth0 and ifcfg-eth1 files
    and added GATEWAY entries in /etc/sysconfig/network

entries plural? There should be only one.

But still I am not able to browse the internet.

Then I ran the command "route"

the output of the command route


Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 <http://10.0.0.0> * 255.255.255.0 <http://255.255.255.0> U 0 0 0 eth1
192.168.1.0 <http://192.168.1.0> * 255.255.255.0 <http://255.255.255.0> U 0 0 0 eth0
169.254.0.0 <http://169.254.0.0> * 255.255.0.0 <http://255.255.0.0> U 0 0 0 eth1
default 10.0.0.1 <http://10.0.0.1> 0.0.0.0 <http://0.0.0.0> UG 0 0 0 eth1


I can see the default gateway is 10.0.0.1 <http://10.0.0.1>,how do I changed it to 192.168.1.1 <http://192.168.1.1>.

There should be one GATEWAY entry in /etc/sysconfig/network, and it should be:


GATEWAY=192.168.1.1

That's assuming that 192.168.1.1 is in fact the correct value. If you have a linux box on your network with Internet access working properly, the following command, run on that box, should output the correct GATEWAY value.

$ netstat -rn | awk '/^0.0.0.0/ { print $2 }'

Paul.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]