[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: USB mouse problems (mouse strts working only when i start the network conf program)



yeah i found something else too........
                      the whole usb devices are detected only after i run the system-config-network. b4 running that the lsusb output is blank, theres alot of additions in the /var/log/messages files.... USB hub and others r only just found out when i run system-config-network.

                   Heres the lines that are added to /var/log/messages after running system-config-network


Sep 13 22:19:17 localhost kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:17 localhost kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Sep 13 22:19:17 localhost kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Sep 13 22:19:17 localhost kernel: ehci_hcd 0000:00:10.4: irq 193, io mem 0xcfffbd00
Sep 13 22:19:17 localhost kernel: ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Sep 13 22:19:17 localhost kernel: hub 1-0:1.0: USB hub found
Sep 13 22:19:17 localhost kernel: hub 1-0:1.0: 8 ports detected
Sep 13 22:19:17 localhost kernel: USB Universal Host Controller Interface driver v2.2
Sep 13 22:19:17 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.0: irq 193, io base 0x0000b400
Sep 13 22:19:17 localhost kernel: hub 2-0:1.0: USB hub found
Sep 13 22:19:17 localhost kernel: hub 2-0:1.0: 2 ports detected
Sep 13 22:19:17 localhost kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.1: irq 193, io base 0x0000b800
Sep 13 22:19:17 localhost kernel: hub 3-0:1.0: USB hub found
Sep 13 22:19:17 localhost kernel: hub 3-0:1.0: 2 ports detected
Sep 13 22:19:17 localhost kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.2: irq 193, io base 0x0000bc00
Sep 13 22:19:17 localhost kernel: hub 4-0:1.0: USB hub found
Sep 13 22:19:17 localhost kernel: hub 4-0:1.0: 2 ports detected
Sep 13 22:19:17 localhost kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Sep 13 22:19:17 localhost kernel: uhci_hcd 0000:00:10.3: irq 193, io base 0x0000c000
Sep 13 22:19:17 localhost kernel: hub 5-0:1.0: USB hub found
Sep 13 22:19:17 localhost kernel: hub 5-0:1.0: 2 ports detected
Sep 13 22:19:18 localhost kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
Sep 13 22:19:18 localhost kernel: input: USB HID v1.00 Mouse [04b3:3107] on usb-0000:00:10.1-2
Sep 13 22:19:18 localhost hal.hotplug[2952]: DEVPATH is not set (subsystem input)
Sep 13 22:19:18 localhost kernel: ehci_hcd 0000:00:10.4: remove, state 1
Sep 13 22:19:18 localhost kernel: usb usb1: USB disconnect, address 1
Sep 13 22:19:18 localhost kernel: ehci_hcd 0000:00:10.4: USB bus 1 deregistered
Sep 13 22:19:18 localhost kernel: uhci_hcd 0000:00:10.0: remove, state 1
Sep 13 22:19:18 localhost kernel: usb usb2: USB disconnect, address 1
Sep 13 22:19:18 localhost kernel: uhci_hcd 0000:00:10.0: USB bus 2 deregistered
Sep 13 22:19:18 localhost kernel: uhci_hcd 0000:00:10.1: remove, state 1
Sep 13 22:19:18 localhost kernel: usb usb3: USB disconnect, address 1
Sep 13 22:19:18 localhost kernel: usb 3-2: USB disconnect, address 2
Sep 13 22:19:18 localhost hal.hotplug[2994]: DEVPATH is not set (subsystem input)
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.1: USB bus 3 deregistered
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.2: remove, state 1
Sep 13 22:19:19 localhost kernel: usb usb4: USB disconnect, address 1
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.2: USB bus 4 deregistered
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.3: remove, state 1
Sep 13 22:19:19 localhost kernel: usb usb5: USB disconnect, address 1
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.3: USB bus 5 deregistered
Sep 13 22:19:19 localhost kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:19 localhost kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Sep 13 22:19:19 localhost kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Sep 13 22:19:19 localhost kernel: ehci_hcd 0000:00:10.4: irq 193, io mem 0xcfffbd00
Sep 13 22:19:19 localhost kernel: ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Sep 13 22:19:19 localhost kernel: hub 1-0:1.0: USB hub found
Sep 13 22:19:19 localhost kernel: hub 1-0:1.0: 8 ports detected
Sep 13 22:19:19 localhost kernel: USB Universal Host Controller Interface driver v2.2
Sep 13 22:19:19 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.0: irq 193, io base 0x0000b400
Sep 13 22:19:19 localhost kernel: hub 2-0:1.0: USB hub found
Sep 13 22:19:19 localhost kernel: hub 2-0:1.0: 2 ports detected
Sep 13 22:19:19 localhost kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.1: irq 193, io base 0x0000b800
Sep 13 22:19:19 localhost kernel: hub 3-0:1.0: USB hub found
Sep 13 22:19:19 localhost kernel: hub 3-0:1.0: 2 ports detected
Sep 13 22:19:19 localhost kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.2: irq 193, io base 0x0000bc00
Sep 13 22:19:19 localhost kernel: hub 4-0:1.0: USB hub found
Sep 13 22:19:19 localhost kernel: hub 4-0:1.0: 2 ports detected
Sep 13 22:19:19 localhost kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 193
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Sep 13 22:19:19 localhost kernel: uhci_hcd 0000:00:10.3: irq 193, io base 0x0000c000
Sep 13 22:19:19 localhost kernel: hub 5-0:1.0: USB hub found
Sep 13 22:19:19 localhost kernel: hub 5-0:1.0: 2 ports detected
Sep 13 22:19:19 localhost kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
Sep 13 22:19:19 localhost kernel: input: USB HID v1.00 Mouse [04b3:3107] on usb-0000:00:10.1-2
Sep 13 22:19:20 localhost hal.hotplug[3109]: DEVPATH is not set (subsystem input)

And           grep mice /etc/X11/xorg.conf    returns

                 Option      "Device" "/dev/input/mice"            

 as it should...
 
 So what should i do??

                     

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]