Nut,usb and installation

[Markku Kolkka]

david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25. 
syyskuuta 2005 00:37):
> # If the UPS is locally attached set it to "yes"
> SERVER=yes
> # Model of the UPS (filename to call for it, without path)
> # Example - one of
> #       apcsmart        - APC SMartUPS and similar
> #       fentonups       - Fenton UPS
> #       optiups
> #       bestups
> #       genericups
> #       ups-trust425+625
> #  upsdrvctl
> # You MUST change this, or set SERVER to "no"
> # To support multiple drivers, set MODEL=upsdrvctl
> MODEL=Powermate-3105

The "MODEL" parameter does _not_ mean the actual model of your 
ups, you must set it to the nut driver used for your UPS (or 
"upsdrvctl").
 
> # UPS device - needed if UPS is locally attached
> DEVICE=/dev/ttyS0

Wasn't your UPS connected through USB, not the serial port?

-- 
 Markku Kolkka
 markku.kolkka at iki.fi