Nut,usb and installation

[david walcroft]

Markku Kolkka wrote:
> david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25. 
> syyskuuta 2005 00:37):
> 
>># If the UPS is locally attached set it to "yes"
>>SERVER=yes
>># Model of the UPS (filename to call for it, without path)
>># Example - one of
>>#       apcsmart        - APC SMartUPS and similar
>>#       fentonups       - Fenton UPS
>>#       optiups
>>#       bestups
>>#       genericups
>>#       ups-trust425+625
>>#  upsdrvctl
>># You MUST change this, or set SERVER to "no"
>># To support multiple drivers, set MODEL=upsdrvctl
>>MODEL=Powermate-3105
> 
> 
> The "MODEL" parameter does _not_ mean the actual model of your 
> ups, you must set it to the nut driver used for your UPS (or 
> "upsdrvctl").
>  
> 
>># UPS device - needed if UPS is locally attached
>>DEVICE=/dev/ttyS0
> 
> 
> Wasn't your UPS connected through USB, not the serial port?
> 
Ok, I'll set up with MODEL=genericups, but I'm not sure what USB uses 
for connections <socket> <port> and how to determine the same for a 
config file.

Thanks for all you help Markku.

                                   david