[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: USB thumb drive questio



Hi Charles and folks,

Tks for your advice.

> It might be simpler to run dmesg after inserting the device,

# dmesg | grep usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[<ffffffff802a8d8c>] (usb_hcd_irq+0x0/0x50)
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on
usb-0000:00:0b.0-2
usb 1-8: new high speed USB device using ehci_hcd and address 3
usb 1-8: device not accepting address 3, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 4
usb 1-8: device not accepting address 4, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 5
usb 1-8: device not accepting address 5, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 6
usb 1-8: device not accepting address 6, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 7
usb 1-8: device not accepting address 7, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 8
usb 1-8: device not accepting address 8, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 9
usb 1-8: device not accepting address 9, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 10
usb 1-8: device not accepting address 10, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 11
usb 1-8: device not accepting address 11, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 12
usb 1-8: device not accepting address 12, error -110
usb 1-8: new high speed USB device using ehci_hcd and address 13
usb 1-8: device not accepting address 13, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 15
usb 1-5: device not accepting address 15, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 16
usb 1-5: device not accepting address 16, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 17
usb 1-5: device not accepting address 17, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 18
usb 1-5: device not accepting address 18, error -110


There are errors.


# fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14        1734    13823932+  83  Linux
/dev/sda3            1735        3008    10233405   83  Linux
/dev/sda4            3009        9729    53986432+   5  Extended
/dev/sda5            3009        3262     2040223+  82  Linux swap /
Solaris


USB drive not found


B.R.
SL




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]