USB thumb drive questio

[Gbenga Shobowale]

On 4/22/06, Stephen Liu <satimis at yahoo.com> wrote:
> Hi Charles and folks,
>
> Tks for your advice.
>
> > It might be simpler to run dmesg after inserting the device,
>
> # dmesg | grep usb
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> usbcore: registered new driver libusual
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> [<ffffffff802a8d8c>] (usb_hcd_irq+0x0/0x50)
> usb usb1: configuration #1 chosen from 1 choice
> usb usb2: configuration #1 chosen from 1 choice
> usb 2-2: new low speed USB device using ohci_hcd and address 2
> usb 2-2: configuration #1 chosen from 1 choice
> input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on
> usb-0000:00:0b.0-2
> usb 1-8: new high speed USB device using ehci_hcd and address 3
> usb 1-8: device not accepting address 3, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 4
> usb 1-8: device not accepting address 4, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 5
> usb 1-8: device not accepting address 5, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 6
> usb 1-8: device not accepting address 6, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 7
> usb 1-8: device not accepting address 7, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 8
> usb 1-8: device not accepting address 8, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 9
> usb 1-8: device not accepting address 9, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 10
> usb 1-8: device not accepting address 10, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 11
> usb 1-8: device not accepting address 11, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 12
> usb 1-8: device not accepting address 12, error -110
> usb 1-8: new high speed USB device using ehci_hcd and address 13
> usb 1-8: device not accepting address 13, error -110
> usb 1-5: new high speed USB device using ehci_hcd and address 15
> usb 1-5: device not accepting address 15, error -110
> usb 1-5: new high speed USB device using ehci_hcd and address 16
> usb 1-5: device not accepting address 16, error -110
> usb 1-5: new high speed USB device using ehci_hcd and address 17
> usb 1-5: device not accepting address 17, error -110
> usb 1-5: new high speed USB device using ehci_hcd and address 18
> usb 1-5: device not accepting address 18, error -110
>
I think there might be something wrong with your usb device and fedora
can't seem to assign an address for why don't you try another type of
flash drive and see what happens?
>
> There are errors.
>
>
> # fdisk -l
>
> Disk /dev/sda: 80.0 GB, 80026361856 bytes
> 255 heads, 63 sectors/track, 9729 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
> /dev/sda1   *           1          13      104391   83  Linux
> /dev/sda2              14        1734    13823932+  83  Linux
> /dev/sda3            1735        3008    10233405   83  Linux
> /dev/sda4            3009        9729    53986432+   5  Extended
> /dev/sda5            3009        3262     2040223+  82  Linux swap /
> Solaris
>
>
> USB drive not found
>
>
> B.R.
> SL
>
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>