needed help on MINICOM
Gowri Satish Adimulam
gowri at bitel.co.kr
Thu Feb 2 05:32:49 UTC 2006
iam logged on as superuser.
I have pasted the permissions for all ttyS0 ..s3
crw-rw---- 1 root uucp 4, 65 Feb 2 14:11 ttyS1
[root at localhost dev]# ls -lrt ttyS2
crw-rw---- 1 root uucp 4, 66 Feb 2 2006 ttyS2
[root at localhost dev]# ls -lrt ttyS3
crw-rw---- 1 root uucp 4, 67 Feb 2 2006 ttyS3
[root at localhost dev]# ls -lrt ttyS0
crw-rw---- 1 root uucp 4, 64 Feb 2 14:30 ttyS0
I have also tried to ttys1 and ttys0 , but same result .
do any of you have sample DF1 file , iy yes please send it to me.
reagards
Gowri
On Wed, 2006-02-01 at 23:20 -0600, Mike McCarty wrote:
> Gowri Satish Adimulam wrote:
> > Hi ,
> > Iam try to use minicom as simple com-port, it is connected to embedded
> > system board via RS 232 cable.
> >
> >
> > in minicom ->serial port setup i have set as
> >
> > ttyS3,
> > baud rate 57600 8n1 which in acordance with embedded system.
> >
> >
> >
> > When my embedded systme boots up , there should be some messages
> > displayed on my com port , but unfortunately its not happening.
> >
> > i have verified the same setup in windows using hyperterminal it is
> > working fine.
> >
> > do i need to do any thing more in the setup.
> >
> > Thanks in Advance.
>
> You may have permission problems. Are you running minicom as root?
> If not, then what are the permissions on /dev/ttyS3?
>
> Mike
> --
> p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
> This message made from 100% recycled bits.
> You have found the bank of Larn.
> I can explain it for you, but I can't understand it for you.
> I speak only for myself, and I am unanimous in that!
>
More information about the fedora-list
mailing list