needed help on MINICOM
Jon Ingason
Jon.Ingason at telia.com
Thu Feb 2 17:57:44 UTC 2006
Gowri Satish Adimulam wrote:
>
> Hi ,
> On Thu, 2006-02-02 at 00:20 -0600, Mike McCarty wrote:
>
>>Gowri Satish Adimulam wrote:
>>
>>>Hi ,
>>>Iam try to use minicom as simple com-port, it is connected to embedded
>>>system board via RS 232 cable.
>>Are you using a "null modem" cable? You may need it.
>>
>>Mike
>># Machine-generated file - use "minicom -s" to change parameters.
>>pr port /dev/ttyS3
>>pu baudrate 115200
>>pu bits 8
>>pu parity N
>>pu stopbits 1
>>pu minit
>>pu mreset
>>pu mdialpre
>>pu mdialsuf
>>pu mdialpre2
>>pu mdialsuf2
>>pu mdialpre3
>>pu mdialsuf3
>>pu mhangup
>>pu mdialcan
>>pu backspace BS
>>pu rtscts No
----------------------^^-- change this to "Yes"
>>pu xonxoff Yes
----------------------^^^- change this to "No"
>>
You can change it with ^AO
─────[configuration]──────
│ Filenames and paths │
│ File transfer protocols │
->│ Serial port setup │
│ Modem and dialing │
│ Screen and keyboard │
│ Save setup as dfl │
│ Save setup as.. │
│ Exit │
──────────────────────────
──────────────────────────────────────────
│ A - Serial Device : /dev/ttyS1 │
│ B - Lockfile Location : /var/lock │
│ C - Callin Program : │
│ D - Callout Program : │
│ E - Bps/Par/Bits : 38400 8N1 │
->│ F - Hardware Flow Control : Yes │
->│ G - Software Flow Control : No │
│ │
│ Change which setting? │
│ │
──────────────────────────────────────────
--
Jon Ingason
More information about the fedora-list
mailing list