smartctl on FC4 broken for 3ware 9xxx (13c1:1002) RAID cards?

[Robinson Tiemuqinke]

Hi,

 I installed a FC4 box, and tried to use smartctl to
show disk parameters on SATA drives, or SATA drives
connected through 3Ware RAID5 card, but neither works,
my smartctl version is 5.33. my kernel is
2.6.15-1.1831_FC4smp. I added two "-T permissive" but
still no luck.

 Any suggestion are greatly appreciated. Thanks.

[root at testbox01 ~]# lspci | grep RAID
03:01.0 RAID bus controller: 3ware Inc 9xxx-series
SATA-RAID
[root at testbox01 ~]# lspci -n  |grep 03:01.0
03:01.0 Class 0104: 13c1:1002

[root at testbox01 ~]# rpm -qf /usr/sbin/smartctl
smartmontools-5.33-1.5

[root at testbox01 ~]# uname -r
2.6.15-1.1831_FC4smp

[root at testbox01 ~]# smartctl -a -d 3ware,1 /dev/sda
smartctl version 5.33 [x86_64-redhat-linux-gnu]
Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 1)
Smartctl: Device Read Identity Failed (not an
ATA/ATAPI device)

A mandatory SMART command failed: exiting. To
continue, add one or more '-T permissive' options.




__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com