sound configuration setup failure

[Alessandro Brezzi]

Right click on the volume control icon in the upper right corner of the
screen; select the sound control. This open the "mixer"
HTH

Alessandro


2006/1/3, jackc <jcraig at brocade.com>:
>
> dmesg has only this in the log, what more should it have reported for
> audio detections?
>
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> intel8x0_measure_ac97_clock: measured 49321 usecs
> intel8x0: clocking to 48000
>
> also weird, in the soundcard detection, the vendor is unknown.
> as this is pci, am i looking at a missing vendor code for the
> driver? wagging now.. ???
>
> tia,jackc...
>
>
> On Tue, 2006-01-03 at 19:58 +0100, Alessandro Brezzi wrote:
> > Hi, sorry if this is OT, but have you verified if the mixer is Ok and
> > no mute are selected?
> > By default FC4, after a fresh install, initialize the sound with all
> > the channel in mute.
> >
> > HTH
> >
> > Alessandro
> >
> >
> > 2006/1/3, jackc <jcraig at brocade.com>:
> >         hi fc folks,
> >
> >         i have been using RH 3.0 WS on my dell (dim 2300) for the last
> >         yr with
> >         sound working fine using the ...
> >
> >         ac97_codec             17100   0  [i810_audio]
> >
> >         driver.
> >
> >         after the FC4 install, its trying to use the
> >
> >         snd_intel8x0           33769  2
> >         snd_ac97_codec         63889  1 snd_intel8x0
> >         snd_pcm_oss            49017  0
> >         snd_mixer_oss          17985  2 snd_pcm_oss
> >         snd_pcm                96841  2 snd_intel8x0,snd_pcm_oss
> >         snd_timer              29893  1 snd_pcm
> >         snd_page_alloc          9673  2 snd_intel8x0,snd_pcm
> >         snd_mpu401_uart         8769  1 snd_intel8x0
> >         snd_rawmidi            26597  1 snd_mpu401_uart
> >         snd_seq_device          8137  1 snd_rawmidi
> >         snd                    54949  11
> >
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> >         soundcore               9889  2 snd
> >
> >         as this driver aint happening, how do i tell fc4 to lose the
> >         snd_intel8x0 and start using the i810_audio driver?
> >
> >         tia,jackc...
> >
> >
> >         --
> >         Jack Craig
> >
> >         XPath/SAS Team
> >         Brocade Communications Systems, Inc.
> >         1600 Technology Dr.
> >         San Jose, CA  95110
> >         408.333.7478
> >         Direct E-mail:  jcraig at brocade.com
> >
> >         --
> >         fedora-list mailing list
> >         fedora-list at redhat.com
> >         To unsubscribe:
> >         https://www.redhat.com/mailman/listinfo/fedora-list
> >
> >
> >
> > --
> > Alessandro Brezzi
> > --
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> --
> Jack Craig
>
> XPath/SAS Team
> Brocade Communications Systems, Inc.
> 1600 Technology Dr.
> San Jose, CA  95110
> 408.333.7478
> Direct E-mail:  jcraig at brocade.com
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>



--
Alessandro Brezzi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20060103/675dec31/attachment-0001.htm>