Getting a lot of errors on FC4

[Jean-Rene Cormier]

On Tue, 2006-07-18 at 12:08 +0930, Tim wrote:
> On Mon, 2006-07-17 at 16:26 -0700, Rick Stevens wrote:
> > if you can, open the box and reseat EVERYTHING (PCI cards, RAM, and if
> > you want to risk it, the CPU(s) as well).
> 
> If you do re-seat the CPU, be sure to adequately re-do the heatsinking,
> if yours has a heatsink which comes away from the actual CPU.  And, of
> course, take anti-static precautions.

Thanks to all who responded! I think we found the problem, after we
checked to make sure all the cards and RAM were seated properly,  we
restarted the box and got a BIOS error and it when we checked in the
BIOS, the -12V was at 0 so we swapped the power supply, hopefully
that'll fix the problem for good!

-- 
Jean-Rene Cormier <jrc at jrcormier.com>