Asus A8V NIC issues

[Matt]

I have had problems with this on FC3. I was never able to get it working
under FC3.
I performed the test by using cp. (cp -a /backup/temp.tgz smbclient D:\winxp
box:)
Linux: hda = PATA 100 80GB (IBM)
Linux: hdb = PATA 133 160GB (SEAGATE)
WinXP: C: = PATA 100 160GB (WD)
WinXP: D: = SATA 150 200GB (MAXTOR)
The only other protocol to try would be FTP or SFTP.  I will try this also.


[root]# ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Current message level: 0x00000037 (55)
        Link detected: yes
[root]#

[root]# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:15:F2:CD:9F:AA
          inet addr:192.168.*.*  Bcast:192.168.*.*  Mask:255.255.255.0
          inet6 addr: fe80::215:f2ff:fecd:9faa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9269058 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11317916 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4000895702 (3.7 GiB)  TX bytes:3254841363 (3.0 GiB)
          Interrupt:177

[root]#


[root]# ethtool -i eth0
driver: skge
version: 1.5
firmware-version: N/A
bus-info: 0000:00:0a.0
[root]#

TIA
Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20060725/458428d7/attachment-0001.htm>