[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Can't enable DMA when using IDE devices on SATA controllers



Marcelo Magno T. Sales wrote:
> Hi,
> 
> I have several IBM desktops and some notebooks in which the IDE interface is a 
> SATA controller, most of them Intel. Here's lspci output:
> -------------
> [marcelo sales sf002698 ~]$ /sbin/lspci | grep IDE
> 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA 
> Controller (rev 03)
> -------------
> On these machines, I can't enable DMA on IDE devices. hdparm shows:
> -------------
> [marcelo sales sf002698 ~]$ /sbin/hdparm /dev/hdc
> /dev/hdc:
>  IO_support   =  0 (default 16-bit)
>  unmaskirq    =  0 (off)
>  using_dma    =  0 (off)
>  keepsettings =  0 (off)
>  readonly     =  0 (off)
>  readahead    = 256 (on)
>  HDIO_GETGEO failed: Inappropriate ioctl for device
> -------------
> When I try to enable DMA, I get:
> -------------
> [marcelo sales sf002698 ~]$ su -c '/sbin/hdparm -d1 /dev/hdc'
> /dev/hdc:
>  setting using_dma to 1 (on)
>  HDIO_SET_DMA failed: Operation not permitted
>  using_dma    =  0 (off)
> -------------
> I thought this was caused by lack of kernel support for the SATA controller, 
> but I've compiled the FC kernel and the vanilla kernel several times, with 
> different settings, and have got no luck on this. libata is built and loaded, 
> as shown by lsmod:
> [marcelo sales sf002698 ~]$ /sbin/lsmod | grep libata
> libata                 58065  1 ata_piix
> scsi_mod              129001  3 sg,libata,sd_mod
> 
> What needs to be done to enable DMA support? I'm using kernel 
> 2.6.16-1.2122_FC5smp.
> 
> Thanks,
> 
> Marcelo
> 
Hdparm can NOT control DMA setting for SATA drives. What I have done
is to add "hdc=noprobe" to the Grub boot line for the kernel. hdc is
then treated as a SCSI device, and it uses the BIOS DMA settings.
Hdparm will still say that DMA is not turned on for the drive, but
DMA will be used. (It also says that DMA is off for /dev/sda.)

This was covered in another thread here not that log ago. There is
still work to be done so that hdparm will correctly report things
for SATA devices...

Mikkel
-- 

  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]