Yanking my own chain - Kernel 2.6.18-1.2849.fc6 freezes
Max Pyziur
pyz at brama.com
Sat Nov 18 17:38:48 UTC 2006
I realize that it is uncool to not post error/log messages.
I couldn't find any, but this is the last item left on the screen when the
boot freezes using *2849*.
(From my scribbles)
...
IO window: disabled.
MEM window: f6000000-f8ffffff
NET: Registered protocol family 2
Hope that helps. And what should I do?
Max
pyz at brama.com
On Sat, 18 Nov 2006, Max Pyziur wrote:
>
>
> Greetings,
>
> Installed the kernel on my desktop via yum. When I rebooted the machine
> installed and couldn't get to the start of services. Sorry, but I've got no
> log to show you.
>
> fyi,
>
> Max Pyziur
> pyz at brama.com
>
>
>
>
>
>
>
> Soporific details about my machine below:
> P3-1.4GHZ, 1GB RAM, 2 HDDs
>
> hdparm info:
> /dev/hda:
>
> Model=MAXTOR 6L040J2, FwRev=A93.0500, SerialNo=362169120743
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
> BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78177792
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: ATA/ATAPI-1
> ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
>
> * signifies the current active mode
>
> root at brill ~> hdparm -i /dev/hdb
>
> /dev/hdb:
>
> Model=ST3120026A, FwRev=3.06, SerialNo=3JT12L7C
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1
> ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
>
>
> lspci info:
> root at brill ~> lspci -v
> 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
> (rev c4)
> Flags: bus master, medium devsel, latency 8
> Memory at f0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 2.0
> Capabilities: [c0] Power Management version 2
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x
> AGP] (prog-if 00 [Normal decode])
> Flags: bus master, 66MHz, medium devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: f6000000-f8ffffff
> Prefetchable memory behind bridge: f4000000-f5ffffff
> Capabilities: [80] Power Management version 2
>
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
> 40)
> Subsystem: Tyan Computer Unknown device 0000
> Flags: bus master, stepping, medium devsel, latency 0
> Capabilities: [c0] Power Management version 2
>
> 00:07.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
> [Master SecP PriP])
> Subsystem: VIA Technologies, Inc.
> VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
> Flags: bus master, medium devsel, latency 32
> I/O ports at d000 [size=16]
> Capabilities: [c0] Power Management version 2
>
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 1a) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Flags: bus master, medium devsel, latency 32, IRQ 5
> I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
>
> 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 1a) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Flags: bus master, medium devsel, latency 32, IRQ 5
> I/O ports at d800 [size=32]
> Capabilities: [80] Power Management version 2
>
> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
> Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> Flags: medium devsel, IRQ 9
> Capabilities: [68] Power Management version 2
>
> 00:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
> Subsystem: Creative Labs CT4832 SBLive! Value
> Flags: bus master, medium devsel, latency 32, IRQ 11
> I/O ports at dc00 [size=32]
> Capabilities: [dc] Power Management version 1
>
> 00:08.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
> Subsystem: Creative Labs Gameport Joystick
> Flags: bus master, medium devsel, latency 32
> I/O ports at e000 [size=8]
> Capabilities: [dc] Power Management version 1
>
> 00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
> (rev 08)
> Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at fa100000 (32-bit, non-prefetchable) [size=4K]
> I/O ports at e400 [size=64]
> Memory at fa000000 (32-bit, non-prefetchable) [size=1M]
> [virtual] Expansion ROM at 50000000 [disabled] [size=1M]
> Capabilities: [dc] Power Management version 2
>
> 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> Subsystem: Hauppauge computer works Inc. WinTV Series
> Flags: bus master, medium devsel, latency 32, IRQ 5
> Memory at fa101000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
>
> 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
> 11)
> Subsystem: Hauppauge computer works Inc. WinTV Series
> Flags: bus master, medium devsel, latency 32, IRQ 5
> Memory at fa102000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
>
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev
> 04) (prog-if 00 [VGA])
> Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SGRAM
> Flags: bus master, medium devsel, latency 32, IRQ 10
> Memory at f4000000 (32-bit, prefetchable) [size=32M]
> Memory at f6000000 (32-bit, non-prefetchable) [size=16K]
> Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
> [virtual] Expansion ROM at f6010000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 2
> Capabilities: [f0] AGP version 2.0
>
>
More information about the fedora-list
mailing list