Hard Drive Error Disk or Motherboard?

Paul Ward pnward at googlemail.com
Mon Nov 20 20:49:23 UTC 2006


sounds like a posibility, I will check this out in the morning.
I have looked at the disk and it looks set correctly as device 0 master.
I did unplug the cable as I had to move the cable as the drive was
plugged into the middle conector and I had to change that to reach the
new drive.

I have also noticed that since plugging in my testing drive (currently
FC6) it seems fine.

Thanks for the sanity check ;)

On 20/11/06, bruce <bedouglas at earthlink.net> wrote:
> hi adam...
>
> not to imply that this might be your issue... but i had something similar
> with a drive i was dealing with a few weeks ago. turned out to be a simple
> problem in that i hadn't plugged in the data cable completely, and that i
> hadn't properly configured the master/slave jumpers completely.
>
>
>
> -----Original Message-----
> From: fedora-list-bounces at redhat.com
> [mailto:fedora-list-bounces at redhat.com]On Behalf Of Adam Hough
> Sent: Monday, November 20, 2006 10:52 AM
> To: For users of Fedora
> Subject: Re: Hard Drive Error Disk or Motherboard?
>
>
> Have your tried testing the power supply yet?
>
> On Mon, 2006-11-20 at 18:48 +0000, Paul Ward wrote:
> > Hi,
> >
> > I started having a problem this morning after I added an extra drive
> > to my ide1 channel as a slave.
> > After only 60 seconds the following messages started to appear on my
> > tty1 screen.
> > I immediatly removed the new disk and tried again with the same messages.
> > Next thing was removing and changeing the ide cable again this did not
> work.
> >
> > I have read the following from another post but am unsure if this
> > would work also the file hardware does not exist on my FC5.
> >
> > I would like to add the board was running windozes a few years back
> > and it started having disk problems. I then shelved it for 6 months
> > but Fedora seemed ok for the last year on it untill now.
> >
> > Does anyone have any suggestions.
> >
> > Nov 20 10:12:09 myth kernel: hda: dma_intr: status=0x51 { DriveReady
> > SeekComplete Error }
> > Nov 20 10:12:09 myth kernel: hda: dma_intr: error=0x10 {
> > SectorIdNotFound }, LBAsect=110169966, high=6, low=9506670,
> > sector=110169951
> > Nov 20 10:12:09 myth kernel: ide: failed opcode was: unknown
> > Nov 20 10:12:16 myth kernel: hda: dma_intr: status=0x51 { DriveReady
> > SeekComplete Error }
> > Nov 20 10:12:16 myth kernel: hda: dma_intr: error=0x10 {
> > SectorIdNotFound }, LBAsect=110169966, high=6, low=9506670,
> > sector=110169951
> > Nov 20 10:12:16 myth kernel: ide: failed opcode was: unknown
> > Nov 20 10:12:24 myth kernel: hda: dma_intr: status=0x51 { DriveReady
> > SeekComplete Error }
> > Nov 20 10:12:24 myth kernel: hda: dma_intr: error=0x10 {
> > SectorIdNotFound }, LBAsect=110169966, high=6, low=9506670,
> > sector=110169951
> > Nov 20 10:12:24 myth kernel: ide: failed opcode was: unknown
> > Nov 20 10:12:31 myth kernel: hda: dma_intr: status=0x51 { DriveReady
> > SeekComplete Error }
> > Nov 20 10:12:31 myth kernel: hda: dma_intr: error=0x10 {
> > SectorIdNotFound }, LBAsect=110169966, high=6, low=9506670,
> > sector=110169951
> > Nov 20 10:12:31 myth kernel: ide: failed opcode was: unknown
> > Nov 20 10:12:31 myth kernel: hda: DMA disabled
> > Nov 20 10:15:18 myth kernel: hdb: DMA disabled
> > Nov 20 10:16:29 myth kernel: ide0: reset: success
> >
> --
> Adam Hough
> High Performance Computing
> Computing Services Center 200
> 225-578-7202
> fax: 225-578-6400
> ahough at lsu.edu
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>




More information about the fedora-list mailing list