Help: Machine says it's running hot
Mike McCarty
Mike.McCarty at sbcglobal.net
Wed Oct 25 17:44:17 UTC 2006
Arthur Pemberton wrote:
> On 10/25/06, Tony Nelson <tonynelson at georgeanelson.com> wrote:
>
>> At 9:41 AM -0500 10/25/06, Arthur Pemberton wrote:
>> >I got messages saying that the machine was running hot on several
>> >occasions. The first time, I shut down the machine, check thed the
>> >temp in the BIOS (68 degrees C) and then proceeded to clean out the
>> >CPU fan, and dusted teh rest of the machine.
>> >
>> >The second time I just restarted to the BIOS to check the temp again
>> >myself: 74 degrees C Both these temps are supposed to be within the
>> >okay range of my Intel Celeron running at 2.8 GHz.
>> >
>> >Please advise on what could be causing this, the message (pasted
>> >below) are very unsettling.
>> >
>> >======================================================
>> >Oct 25 01:38:00 Watson kernel: CPU0: Temperature above threshold
>> >Oct 25 01:38:00 Watson kernel: CPU0: Running in modulated clock mode
>> >Oct 25 01:38:03 Watson ntpd[2569]: kernel time sync enabled 0001
>> >Oct 25 01:38:05 Watson kernel: CPU0: Temperature above threshold
>> >Oct 25 01:38:05 Watson kernel: CPU0: Running in modulated clock mode
>> >Oct 25 01:38:10 Watson kernel: CPU0: Temperature above threshold
>> >Oct 25 01:38:10 Watson kernel: CPU0: Running in modulated clock mode
>> >Oct 25 01:38:15 Watson kernel: CPU0: Temperature above threshold
>> >Oct 25 01:38:15 Watson kernel: CPU0: Running in modulated clock mode
>> >Oct 25 01:38:20 Watson kernel: CPU0: Temperature/speed normal
>> >Oct 25 01:38:25 Watson kernel: CPU0: Temperature above threshold
>> >======================================================
>>
>> What is the threshold set to?
>> --
>
>
> I do not know, and do not know how to find out.
>
> What is the command, if you know?
>
$ apropos sensors
libsensors (3) - publically accessible functions provided by
the sensors library
sensors (1) - printing sensors information
sensors-detect (8) - detect hardware monitoring chips
sensors.conf [sensors] (5) - libsensors configuration file
$ locate sensors.conf
/etc/sensors.conf
/usr/share/man/man5/sensors.conf.5.gz
$ ls -l /etc/sensors.conf
-rw-r--r-- 1 root root 57594 Apr 13 2004 /etc/sensors.conf
$ vi /etc/sensors.conf
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
More information about the fedora-list
mailing list