Can't boot after upgrade to FC6

[Tim]

On Wed, 2007-01-03 at 09:02 +0100, Alexander Apprich wrote:
> To me it seems pretty strange, that you harddrive (hd0) is /dev/hdi as
> hd0 should be /dev/hda if I'm not wrong.

That'd depend on what other ports are available.

On one of my my motherboards (an ABit BE6), there's four IDE ports.  The
first two are 33 MHz UDMA, the last two are 66 MHz UDMA.  So the slower
ones got used for things like optical drives, the last two for hard
drives.  So, my first hard drive is /dev/hde.

For other boards, with SCSI, SATA, etc., they may be in the same
position (that their hard drive isn't using the first port in the list).

-- 
(Currently testing FC5, but still running FC4, if that's important.)

Don't send private replies to my address, the mailbox is ignored.
I read messages from the public lists.