xorg X11 xorg.conf does not support 'Virtual' parameter

[Rogue]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1



Dan Sawyer wrote:
> Thanks for the note. The major difference (except for the dropped mode
> lines messages) in the log files is the system that doesn't work has the
> following lines:
> 
> enable montype: 2
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
> (II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
> (II) RADEON(0): EDID for output VGA-0
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
> (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
> (II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
> (II) RADEON(0): Detected Monitor Type: 0
> (II) RADEON(0): EDID for output DVI-0
> (WW) RADEON(0): DDC2/I2C is not properly initialized
> 
> The kernel is a custom kernel and is identical for both systems. Do you
> get DDC2/I2C errors?
> 

Actually i have seen similar DDC2/I2C warnings on my system[1] too. On a
M300 Radeon card I see these errors. Any suggestions as to what this
really means?

1 -
http://smolt.fedoraproject.org/show?UUID=8f215efa-af04-4599-98fd-423be01f6614
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)

iD8DBQFHRaQRceS9IQvx51YRAmWIAJ9LtCJGKyPEdCkEgXyCfozHe2ycTgCbB2tb
XFUpWjlCTqWWv8Luqrq5HsI=
=UtV3
-----END PGP SIGNATURE-----