Revisted Eth1 problem

[david walcroft]

Ed Greshko wrote:
> david walcroft wrote:
>
>   
>> I changed the Eth1 address to 192.168.0.1
>>                       Subnet default to 255.255.255.255
>>     
>
> Most likely it should be 255.255.255.0
>
>   
>>                      default Gateway to 192.168.0.0
>>     
>
> Probably should not be set at all for that interface.  Post the output of
> "netstat -rn".
>
>   
>> Would this be correct
>> I'm using a crossover cable.
>>     
>
> If you are using a crossover cable on eth1 then you don't need DHCP.  Better
> to go with static network settings.
>
>   
>> I see that there's a DHCP upgrade in Updates,I hope this can help with
>> this problem.
>>     
>
> Just forget about using DHCP on eth1.  Life will be easier.
>
>   
>> I have changed my ethernet card on Eth1.
>> My Iptables have not been changed for a long time,how would I test it
>> for any problems.
>>     
>
> My netstat -rn
[david at reddwarf ~]$ netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt 
Iface
121.208.32.0    0.0.0.0         255.255.248.0   U         0 0          0 
eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 
eth1
0.0.0.0         121.208.32.1    0.0.0.0         UG        0 0          0 
eth0
[david at reddwarf ~]$         


Thanks  david