[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: F10: too many Network headaches



Phil Meyer wrote:
Andre Costa wrote:
...

First weird symptom: NetworkManager refuses to allow me to edit settings for eth0. It doesn't ask me for any kind of authentication and simply shows all fields disabled. I don't know why it started doing this, because right after I booted for the first time I was able to edit it. Later on I disabled SELinux, don't know if this is related somehow. This is specially annoying because I can't configure DNS servers this way, and must always edit /etc/resolv.conf manually.

One F10 system installed recently needed a fixed IP, so I gave it one during the install.
NetworkManager works just fine in this case.

Here is a /etc/sysconfig/network-scripts/ifcfg-eth0 that works:

# Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet
# Faked to protect the inno^H^H^H^H company
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.1.49.255
DNS1=10.1.10.41
DNS2=10.1.10.42
GATEWAY=10.1.49.1
HWADDR=00:17:a4:77:BB:14
IPADDR=10.1.49.205
NETMASK=255.255.255.0
ONBOOT=yes
DOMAIN="mydomain.com"

Heres a working one.
In your system-config-network uncheck the box about NetworkManager and reboot.
Are you sure about the GATEWAY=   ???

DEVICE=eth0
ONBOOT=yes
TYPE=Ethernet
BOOTPROTO=static
IPADDR=192.168.1.254
NETMASK=255.255.255.0
NETWORK=
BROADCAST=192.168.1.255
GATEWAY=192.168.1.1
HWADDR=00:16:EC:69:37:55
DNS1=12.207.235.29
DNS2=12.207.232.41
DNS3=208.67.222.222
IPV6INIT=no
USERCTL=no
PEERDNS=yes



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]